Home > Engine > Bottom End > Pistons > VW/Audi > 1.8T >

IE Spec JE Race 1.8T 83MM Bore (+2mm bore) 92.8MM Stroker Pistons
IE Spec JE Race 1.8T 83MM Bore (+2mm bore) 92.8MM Stroker Pistons


 
Our Price: $999.99


Product Code: JE_18T_92.8RACE
Qty:

Description
 
This is a set of custom made JE pistons that we have made to our specifications. These are the pistons that we run in all of our high HP race cars. These pistons come standard with tool steel wrist pins, ceramic dome coating, and JE's Tuff-Skirt anti friction skirt coating. They also feature oil ring rail support, which allows the piston rings to be moved further down on the piston. Lateral gas ports also come standard to build up pressure behind the compression ring and seal it against the cylinder wall. These are made to be used with the FSI (92.8MM stroke) crankshaft. This will increase displacement to 2008cc. This increased displacement yields more power on the same boost, less chance of detonation at a given power level (Lower peak cylinder pressures) and faster spoolup.

JE pistons are a great upgrade for someone looking to build a stout race engine. They have 20mm wrist pins so they will require a set of rods with 20mm pins to match. They feature JE's 2618 alloy which is stronger then most other pistons made from 4032, and are specifically engineered for extreme applications. Dish requires no deburring or preparation.

Features:

83MM bore
92.8MM stroke
9.0:1 CR
Tool steel wrist pins
Ceramic dome coating
Tuff-Skirt coating
Oil ring rail support
Lateral gas ports

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Engine > Bottom End > Pistons > VW/Audi > 1.8T
Engine > Bottom End > Pistons > VW/Audi
Engine > Bottom End > Pistons