You are here: Home > Engine > Bottom End > Connecting Rods > VW 6 cylinder
Sort By:
Page of 1
IE Forged Connecting Rods VW 164X20 | Fits 12V & 24V 2.8L VR6 IE Forged Connecting Rods VW 164X20 | Fits 12V & 24V 2.8L VR6

PRODUCT FEATURES

� 20mm wrist pin for use with factory or aftermarket 20mm pistons

� Forged from vacuum drawn 2 piece 4340 chrome moly steel

� Upgraded H beam design greatly increases strength and durability

� Combination tested to 700+HP on 6 cylinder engines

� Includes IE Spec ARP 2000 rod bolts with "IE" stamp to ensure genuine product

� Individual computer optimized design to match unique VW/Audi engine applications

� Honed to exacting tolerances within 250 millionths of an inch

� Optional forced pin oiling (rifle drilling) for long wrist pin life

� Each connecting rod set is balanced to weights within +/- 1 gram

� Dimensionally and magnaflux inspected to ensure extreme reliability

� Multi-stage heat treated for dimensional stability and fatigue life

OVERVIEW

When increasing the power output of your VW VR6 engine, internal parts begin to fail as they are pushed far beyond their original factory spec limits. Integrated Engineering Forged Connecting Rods are designed to replace the factory units and take the beating from today's high-output power modifications. Drive fast and reliably with IE performance rods, guaranteed to support over 700HP on VR6 engines!

TECHNICAL DIMENSIONS

  • Center to Center: 164mm
  • Wrist Pin Diameter: 20mm
  • BIG End Journal Width: 19.90mm
  • Wrist Pin Style: Non-tapered
  • Big End Journal Diameter: 56.75mm
  • Average Rod Weight (with Bolts): 558 grams
  • Rod Bolt Dimensions: 5/16" x 1.5" UHL

Our Price: $725.99
IE Forged Connecting Rods Audi 154X21 | Fits 2.7T V6 and 2.8L 30V V6 engines IE Forged Connecting Rods Audi 154X21 | Fits 2.7T V6 and 2.8L 30V V6 engines

ROD FEATURES

  • 21mm wrist pin for use with factory or aftermarket 21mm pistons
  • Forged from vacuum drawn 2 pieces 4340 chromemoly steel
  • Upgraded H beam design greatly increases strength and durability
  • Combination tested to 700+HP on 6 cylinder engines
  • Includes IE Spec ARP 2000 rod bolts with "IE" stamp
  • Individual computer-optimized design
  • Honed to exacting tolerances within 250 millionths of an inch
  • Each connecting rod set is balanced to weights within +/- 1 gram
  • Dimensionally and magnaflux inspected to ensure extreme reliability
  • Multi-stage heat treated for dimensional stability and fatigue life

AUDI 2.7T ROD OVERVIEW

When increasing the power output of your Audi B5 S4 or RS4 engine, internal parts begin to fail as they are pushed far beyond their original factory spec limits. Integrated Engineering Forged Connecting Rods are designed to replace the factory units and take the beating from today's high-output power modifications. Drive fast and reliably with IE performance rods, guaranteed to support over 700HP on 2.7T engines!

TECHNICAL DIMENSIONS

  • Center to Center: 154mm
  • Wrist Pin Diameter: 21mm
  • BIG End Journal Width: 19.90mm
  • Wrist Pin Style: Non-tapered
  • Big End Journal Diameter: 57.60mm
  • Average Rod Weight (with Bolts): 586 grams
  • Rod Bolt Dimensions: 5/16" x 1.5" UHL

Our Price: $790.99
Brian Crower VW VR6 Rods with 3/8'' Bolts Brian Crower VW VR6 Rods with 3/8'' Bolts

3/8'' ARP 2000 rod bolt. Minimum 83MM bore required

Our Price: $809.99
IE Tuscan I Beam Connecting Rod Set for 2.7T 30V S4 With Aftermarket Pistons (82mm+ Bore Size Required) IE Tuscan I Beam Connecting Rod Set for 2.7T 30V S4 With Aftermarket Pistons (82mm+ Bore Size Required)

Tuscan connecting rods represent the leading edge of technology for bottom end strength, reliability, and lightweight. Our Engineering staff utilizes the most modern technology to optimize these rods to a level never before seen at the enthusiast level. Give your engine a reliably strong connecting rod set that is rated for engines up to 1000BHP!

PRODUCT FEATURES

� UNIQUE I-BEAM DESIGN OFFERS INCREDIBLE BENDING AND TORSIONAL STIFFNESS

� INCLUDES IE SPEC ARP 2000 ROD BOLTS WITH "IE" STAMP TO ENSURE A GENUINE PRODUCT

� APPLICATION SPECIFIC DESIGN OPTIMIZED FOR THE AUDI 2.7T ENGINE

� INDUSTRY LEADING CONNECTING ROD STRENGTH TO WEIGHT RATIO

� HONED TO EXACTING TOLERANCES WITHIN 250 MILLIONTHS OF AN INCH

� FORCED PIN OILING (RIFLE DRILLING) PROVIDES LONG WRIST PIN LONGEVITY

� EACH CONNECTING ROD SET IS BALANCED TO WEIGHTS WITHIN +/- 1 GRAM

� FORGED FROM VACUUM DRAWN 2 PIECE 4340 CHROME MOLY STEEL

� DIMENSIONALLY AND MAGNAFLUX INSPECTED FOR EXTREME RELIABILITY

� COMBINATION TESTED TO OVER 1000BHP

� MULTI-STAGE HEAT TREATED FOR DIMENSIONAL STABILITY AND FATIGUE LIFE

AUDI 2.7T TUSCAN CONNECTING RODS

Tuscan connecting rods for your Audi 2.7T engine represent the leading edge of technology for bottom end strength, reliability, and light-weight engineering staff utilizes the most modern technology to optimize these rods to a level never before seen at the enthusiast level. Give your engine a reliably strong connecting rod set that is rated for engines up to and over 1000BHP!

Our Price: $1,161.99