You are here: Home > Throttle Bodies
Choose a sub category:
Grams Performance Ross Machine Racing
Sort By:
Page of 1
Grams Performance 70mm DBW Throttle Body - VW MKIV 1.8T Grams Performance 70mm MK5-6 Throttle Body Ross Machine Racing 75mm Universal Throttle Body

The Grams Performance 70mm Drive-By-Wire (DBW) Throttle Body for MKIV VW is the perfect upgrade for the restrictive factory unit!

The Grams throttle body is a Plug-n-Play direct OEM replacement that does NOT require swapping electric motors, wiring or mounting adapters. These units are not re-manufactured. Each throttle body includes all new components including a CNC machined billet 6061-T6 aluminum housing with a precision-honed oversized bore, a responsive high-torque servo motor, and a proprietary Non-Contact Hall Effect TPS sensor. To ensure the best performance, throttle response and drive-ability, each TPS sensor is calibrated to meet the specific requirements of the vehicles engine management system. The Grams electronic throttle body is the perfect upgrade for both modified and stock engines with increased airflow demands.

FEATURES:
Substantial Increase in Airflow Over Stock Throttle Body
Precision Honed Oversized 70mm Bore
CNC Machined Billet 6061-T6 Aluminum Body
Aluminum Throttle Plate
Factory Programmable Non-Contact Hall Effect TPS
Optimized TPS Response Curve
High-Torque Precision Servo Motor
Plug-n-Play

The new Grams Drive-By-Wire Electronic Throttle Body for VW/Audi MKV/VI 70 mm is the perfect upgrade for the restrictive and trouble-prone factory 57 mm VW/Audi throttle body. The Grams throttle body is a Plug-n-Play direct OEM replacement that doesn’t require wiring or mounting adapters. These units are not remanufactured. Each throttle body includes all new components including a CNC machined billet 6061-T6 aluminum housing with a precision-honed oversized bore, a high-torque servo motor, and a proprietary Non-Contact Hall Effect TPS sensor. To ensure the best performance, throttle response and driveability, each TPS sensor is calibrated to meet the specific requirements of the vehicles engine management system. The Grams electronic throttle body is the perfect upgrade for both modified and stock engines with increased airflow and reliability demands.

FEATURES:

60% increase in airflow over the stock 57 mm Throttle Body
Precision Honed Oversized 70 mm Bore
CNC machined billet 6061-T6 aluminum housing
Aluminum Throttle Plate
Factory Programmable Non-Contact Hall Effect TPS
Optimized TPS Response Curve
High-Torque and Precision Servo Motor
Plug-n-Play; No adapters needed


Fitment

  • 2015- 2016 Volkswagen Golf (Base, Comfortline, Highline, S, SE, SEL, Trendline)
  • 2015 - 2016 Volkswagen Golf SportWagen (S, SE, SEL)
Ross Machine Racing's 75mm throttle body is manufactured using CNC machining and is made from 6061 billet aluminum combined with a stainless steel shaft.

TPS Notes:

If using - 86-93 5.0L Mustang TPS - Direct bolt on - Standard CW Mustang T/Wheel Rotation
If using - Toyota MR2 TPS - TPS Adapter needed - Standard CW Mustang T/Wheel Rotation
If using - Toyota Supra 2JZGTE TPS - TPS Adapter needed - Reverse CCW T/Wheel Rotation
If using - Lexus 300IS TPS - TPS Adapter is needed, but... it can be ccw or cw. See pictures below for help.

When ordering !!
*** You must select the rotation direction of the throttle wheel see above tps notes***
*** You must note the pull direction of the t/cable. From the front or the rear of the t/body***
*** You must note the finish you want..... black anodize finish or clear iridite machined finish ***

Features:

Choice of two mounting bolt patterns.. 86-93 5.0L Mustang or the Q45
M8x45mm screws and washers included
Available in black anodize or clear iriditie finish. Iridite is easy to remove for polishing
Total thickness including the hose mount is 2-1/2 inches
Available in standard CW or CCW rotation
Cable mounting bracket pre-installed
75mm diameter blade - CNC machined from 6061 aluminum
3.5" (90mm) hose connection
CNC solid billet 6061 aluminum construction
CNC stainless steel shaft - split shaft design
Includes 3.750" o-ring installed in back for prefect seal
Needle bearing with seal to minimize leakage
2.7" throttle cable pulley

Important Note - Your throttle body could take 1-2 days to build before shipping.
Ross Machine Racing 82.5mm Universal Throttle Body Ross Machine Racing 90mm Universal Throttle Body

82.5mm Universal Throttle Body
RMR - 107 - ASSY






Ross Machine Racing's 82.5mm throttle body is manufactured using CNC machining and is made from 6061 billet aluminum combined with a stainless steel shaft.


TPS Notes:

If using - 86-93 5.0L Mustang TPS - Direct bolt on - Standard CW Mustang T/Wheel Rotation
If using - Toyota MR2 TPS - TPS Adapter needed - Standard CW Mustang T/Wheel Rotation
If using - Toyota Supra 2JZGTE TPS - TPS Adapter needed - Reverse CCW T/Wheel Rotation
If using - Lexus 300IS TPS - TPS Adapter is needed, but... it can be ccw or cw. See pictures below for help.

When ordering !!
*** You must select the rotation direction of the throttle wheel see above tps notes***
*** You must note the pull direction of the t/cable. From the front or the rear of the t/body***



Features:

Choice of two mounting bolt patterns.. 86-93 5.0L Mustang or the Q45
M8x45mm screws and washers included
Available in clear iriditie and black anodize. Iridite is easy to remove for polishing
Total thickness including the hose mount is 2-1/2 inches
Available in standard CW or CCW rotation
Cable mounting bracket pre-installed
82.5mm diameter blade - CNC machined from 6061 aluminum
3.5" (90mm) hose connection
CNC solid billet 6061 aluminum construction
CNC stainless steel shaft - split shaft design
Includes 3.750" o-ring installed in back for prefect seal
Needle bearing with seal to minimize leakage
2.7" throttle cable pulley

Important Note - Your throttle body could take 1-2 days to build before shipping.

Ross Machine Racing's 90mm throttle body is made to the highest standards. Manufactured using CNC machining and is made from 6061 billet aluminum combined with a stainless steel shaft.

TPS Notes:

If using - 86-93 5.0L Mustang TPS - Direct bolt on - Standard CW Mustang T/Wheel Rotation
If using - Toyota MR2 TPS - TPS Adapter needed - Standard CW Mustang T/Wheel Rotation
If using - Toyota Supra 2JZGTE TPS - TPS Adapter needed - Reverse CCW T/Wheel Rotation
If using - Lexus 300IS TPS - TPS Adapter is needed, but... it can be ccw or cw. See pictures below for help.

When ordering !!
*** You must select the rotation direction of the throttle wheel see above tps notes***
*** You must note the pull direction of the t/cable. From the front or the rear of the t/body***
*** You must note the finish you want.... black anodize finish or clear iridite machined finish ***

Features:

Uses same mounting bolt pattern as 86-93 5.0L Mustang throttle body
M8x45mm screws and washers included
Available in black anodize or clear iriditie satin finish. Iridite is easy to remove for polishing
Total thickness including the hose mount is 2-1/2 inches
Available in standard Mustang CW or CCW rotation
Cable mounting bracket pre-installed
90mm diameter blade - CNC machined from 6061 aluminum
4" (101mm) hose connection
CNC solid billet 6061 aluminum construction
CNC stainless steel shaft - split shaft design
Black Anodize finish with Ross Machine Racing logo
Includes 4" o-ring installed in back for prefect seal
Needle bearing with seal to minimize leakage
2.7" throttle cable pulley

Important Note - Your throttle body could take 1-2 days to build before shipping.
finish.