You are here: Home > Universal Sensors
Choose a sub category:
AEM Sensors Haltech Sensors
Sort By:
Page of 1
Plug and Pins Only - Bosch Oil / Temperature Sensor Plug and Pins Only - Bosch Oil / Temperature Sensor

SUITS: HT-010920 - Bosch Fluid Pressure and Temperature Sensor
INCLUDES: 1 X 5 Pin Plug, 5 x Pins, 5 x Seals
IMPORTANT EMISSIONS NOTICE:
In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.

Our Price: $13.50
Pressure Sensor Extension Kit Pressure Sensor Extension Kit

LENGTH: 450mm (18")
SUITS: 1/8th NPT Thread MAP, Oil and Fuel Pressure sensors.
INCLUDES: Fragola -4 AN Hose with Male & Female 1/8th NPT Adaptors & Rubber Insulated P-Clamps.
IMPORTANT EMISSIONS NOTICE:
In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.

Our Price: $28.50
AEM Coolant Temperature Sensor Kit w/3/8 inch Female Weld-In Aluminum Bung AEM Coolant Temperature Sensor Kit w/3/8 inch Female Weld-In Aluminum Bung


  • Accuracy: < 2 degrees C / 3.6 degrees F
  • Operating Temp: -40C to 135C / -40F to 275F
  • Resistive Range (O): See Table
  • Dissipation Constant: 24 mW/ degrees C. The ratio, at a specified ambient temperature, of the change in the power dissipation of the sensor to the resultant temperature change of the thermistor. Test medium: silicone oil.
  • Thermal Time Constant: 20-30 sec. The time required for the sensor to achieve 63.2% of its steady state value when subjected to a step change in ambient temperature [Tc=(Tf-Ti)*63.2%+Ti]. Test medium: silicone oil.
  • Sensor Body Material: Brass
  • Thread: 3/8"-18 NPT
  • Hex Size: 3/4"
  • Installation Torque: 20Nm / 15 ft-lbs
  • Weight: 39.5g
  • Elec. Termination: Weatherproof connector. Includes mating connector, pins & wire seals
  • Includes: Water Temp Sensor, 3/8"-18 NPT Aluminum Bung, Connector, Pins & Wire Seals
  • Our Price: $40.25
    AEM Universal 1/8in PTF Water/Coolant/Oil Temperature Sensor Kit AEM Universal 1/8in PTF Water/Coolant/Oil Temperature Sensor Kit


  • Accuracy: < 2 degrees C / 3.6 degrees
  • Operating Temp: -40C to 200C / -40F to 392F
  • Resistive Range (O): See Table
  • Dissipation Constant: 12 mW/ degrees C. The ratio, at a specified ambient temperature, of the change in the power dissipation of the sensor to the resultant temperature change of the thermistor. Test medium: silicone oil.
  • Thermal Time Constant: 10 sec. The time required for the sensor to achieve 63.2% of its steady state value when subjected to a step change in ambient temperature [Tc=(Tf-Ti)*63.2%+Ti]. Test medium: silicone oil.
  • Sensor Body Material: Brass
  • Thread: 1/8"-27 PTF
  • Hex Size: 1/2"
  • Installation Torque: 13.5Nm / 10 ft-lbs
  • Weight: 12.2g
  • Elec. Termination: Connector. Includes mating connector, pins & pin lock
  • Includes: Water Temp Sensor, Connector, Pins & Pin Lock
  • Our Price: $58.11
    AEM K-Type Thermocouple Kit 0-1800F AEM K-Type Thermocouple Kit 0-1800F

    Max Temperature

    1800 degrees F (982.2 degrees C)

    Protective Tube Material

    Inconel

    Sensor Thread

    1/8" NPT (Compression Fitting)

    Sensor Element

    K-Type Thermocouple

    Sheath Length

    3" / 76.2mm

    Sheath Diameter

    0.125" / 3.18mm

    Termination

    Ring Terminals

    Wire Length

    12"

    Accuracy

    Greater of 3.96 degrees F / 2.2 degrees C or 0.75%

    Our Price: $65.06
    Elite 1000/1500 Crank Angle Sensor Sub-Harness for Mazda 13B S6-8 Elite 1000/1500 Crank Angle Sensor Sub-Harness for Mazda 13B S6-8

    SUITS: Mazda 13B engine found in the RX-7 Series 6 - Series 8.
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.

    Our Price: $66.00
    AEM Universal 1/8in NPT Air Intake Temp Sensor Kit w/ Deutsch Style Connector AEM Universal 1/8in NPT Air Intake Temp Sensor Kit w/ Deutsch Style Connector

    • Accuracy: < 1.5 degrees C / 2.7 degrees F
    • Operating Temp: -20C to 150C / -4F to 302F
    • Resistive Range (O): See Instructions
    • Thermal Time Constant: < 15 sec. The time required for the sensor to achieve 63.2% of its steady state value when subjected to a step change in ambient temperature [Tc=(Tf-Ti)*63.2%+Ti]. Test medium: silicone oil
    • Sensor Body Material: Brass
    • Thread: 1/8" NPT
    • Hex Size: 1/2"
    • Installation Torque: 13.5Nm / 10 ft-lbs
    • Weight: 10g
    • Electrical Termination: Weatherproof High Performance DTM-Style connector. Includes Mating Connector, Pins & Wire Seals
    • Includes: Air Temp Sensor High Performance DTM-Style, 1/8" NPT Alumium Bung, Mating Connector, Pins & Wire Seals

    Our Price: $70.42
    AEM Universal 1/8in PTF Water/Coolant/Oil Temperature Sensor Kit w/ Deutsch Style Connector AEM Universal 1/8in PTF Water/Coolant/Oil Temperature Sensor Kit w/ Deutsch Style Connector


  • Accuracy: < 1.5 degrees C / 2.7 degrees F
  • Operating Temp: -20C to 150C / -4F to 302F
  • Resistive Range (O): See Instructions
  • Dissipation Constant: 12 mW/ degrees C. The ratio, at a specified ambient temperature, of the change in the power dissipation of the sensor to the resultant temperature change of the thermistor. Test medium: silicone oil.
  • Thermal Time Constant: 10 sec. The time required for the sensor to achieve 63.2% of its steady state value when subjected to a step change in ambient temperature [Tc=(Tf-Ti)*63.2%+Ti]. Test medium: silicone oil.
  • Sensor Body Material: Brass
  • Thread: 1/8" NPT
  • Hex Size: 1/2"
  • Installation Torque: 13.5Nm / 10 ft-lbs
  • Weight: 10g
  • Electrical Termination: Weatherproof High Performance DTM-Style connector. Includes Mating Connector, Pins & Wire Seals
  • Includes: Water Temp Sensor High Performance DTM-Style, 1/8" NPT Alumium Bung, Mating Connector, Pins & Wire Seals
  • Our Price: $70.42
    AEM Inlet Air Temperature Sensor Kit for EMS AEM Inlet Air Temperature Sensor Kit for EMS


  • Accuracy: < 1.5 degrees C / 2.7 degrees F
  • Operating Temp: -40C to 135C / -40F to 275F
  • Resistive Range (O): See Table
  • Thermal Time Constant: < 15 sec. The time required for the sensor to achieve 63.2% of its steady state value when subjected to a step change in ambient temperature [Tc=(Tf-Ti)*63.2%+Ti]. Test medium: silicone oil
  • Sensor Body Material: Brass
  • Thread: 3/8" NPT
  • Hex Size: 3/4"
  • Installation Torque: 20Nm / 15 ft-lbs
  • Weight: 33.3g
  • Electrical Termination: Weatherproof connector. Includes Mating Connector, Pins & Wire Seals
  • Includes: Air Temp Sensor, 3/8" NPT Alumium Bung, Mating Connector, Pins & Wire Sealst
  • Our Price: $79.97
    Wideband Sensor - Bosch LSU 4.9 Wideband Sensor - Bosch LSU 4.9

    SUITS: Elite Pro Plugin ECU and WB1/WB2
    INCLUDES: Bosch LSU 4.9 sensor with Factory calibration resistor connector (not a Deutsch DT-6 connector)
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.

    Our Price: $104.00
    3 Bar Motorsport MAP Sensor 3 Bar Motorsport MAP Sensor

    INCLUDES: Matching male Deutsch DTM-3 Connector (HT-031001)
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.

    Our Price: $136.00
    Bosch Fluid Pressure and Temperature Sensor Bosch Fluid Pressure and Temperature Sensor

    THREAD: M10 x 1.0
    INCLUDES: Includes: Matching plug and pins, M10 x 1.0 to 1/8NPT adaptor.
    NOTES: Used to measure fluid pressure and temperature Pressure Range 0-150 PSI Temperature Range -40 to 140 Deg C Supplied with adaptor to convert M10x 1.0 thread to 1/8NPT
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.

    Our Price: $144.50
    AEM RTD Exhaust Gas Temperature Sensor Kit AEM RTD Exhaust Gas Temperature Sensor Kit

    Temperature Range-40 degrees F to 1,560 degrees F (-40 degrees C to 850 degrees C)
    Protective Tube MaterialInconel 601
    Sensor ThreadM14x1.5
    Sensor ElementThin film platinum
    Nominal Resistance of Element200 O at 0 degrees C
    Accuracy±2.5 degrees C from -40 degrees C to 280 degrees C

    ±0.9% from 280 degrees C to 850 degrees C
    Response Time T63<11 seconds at 300 degrees C, air velocity of 11m/s

    <6.5 seconds at 300 degrees C, air velocity of 70m/s

    Our Price: $149.55
    AEM 75 PSIa or 5 Bar Stainless Sensor Kit AEM 75 PSIa or 5 Bar Stainless Sensor Kit


  • Accuracy: +/- 0.5% Full Scale over -40C to 105C includes Repeatability, Hysteresis and Linearity
  • Operating Temp: -40C to 105C / -40F to 221F
  • Burst Pressure: 500PSI
  • Response Time: < 1ms
  • Vibration:100 to 2000Hz, 20g Sinusoidal, 3 Axes
  • Sensor Body: Stainless Steel
  • Wetted Materials: 304L & 316L Stainless Steel
  • Thread: 1/8" NPT Male Thread
  • Weight: < 85 Grams
  • Supply Current:
  • Output: .5 to 4.5Vdc Linear
  • Elec. Termination: Integral weatherproof connector, includes mating connector, pins & pin lock
  • Includes: 75 PSIa or 5 Bar Stainless Sensor, Connector, Pins, Pin Lock, 1/8" NPT to -4 Adapter & 1/8" NPT to 3/16" Barb Adapter
  • Our Price: $149.99
    Onboard Wideband Sensor Pack for Elite PRO Plug-in ECUs Onboard Wideband Sensor Pack for Elite PRO Plug-in ECUs

    SUITS: Elite PRO Plug-in ECUs for Australian-made Ford "Barra" Falcons only.
    INCLUDES: O2 Sensor, 1.2m extension cable and weld-on bung.
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.

    Our Price: $152.00
    4 Bar Motorsport MAP Sensor 4 Bar Motorsport MAP Sensor

    INCLUDES: Matching male Deutsch DTM-3 Connector (HT-031001)
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.

    Our Price: $155.00
    Stainless Steel Single Channel Hall Effect Sensor Stainless Steel Single Channel Hall Effect Sensor

    THREAD: 3/8 24 TPI
    SUITS: Wheel Speed, Crank/Cam etc.
    INCLUDES: Matching set of Deutsch DTM 3 connectors (HT-031014)
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.

    Our Price: $180.00
    500 PSI "TI" Pressure Sensor 500 PSI "TI" Pressure Sensor

    THREAD: 1/8 NPT
    INCLUDES: Matching plug and pins, -4 AN adaptor.
    NOTES: "TI" Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.

    Our Price: $184.00
    150 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) 150 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm)

    THREAD: 1/8 NPT
    INCLUDES: Matching Delphi plug and 3 pins.
    NOTES: Motorsport Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.

    Our Price: $184.00
    250 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) 250 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm)

    THREAD: 1/8 NPT
    INCLUDES: Matching Delphi plug and 3 pins.
    NOTES: Motorsport Pressure sensors must not be mounted directly into the fuel rail or engine block, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.

    Our Price: $184.00
    Throttle Position Sensor - Motorsport Contactless Throttle Position Sensor - Motorsport Contactless

    SIZE: 8mm D-Shaft
    SUITS: CW & CCW Rotation
    INCLUDES: Matching Set of Deutsch DTM-3 Connectors (HT-031014)
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.

    Our Price: $194.00
    AEM 50 PSIa or 3.5 Bar Stainless Sensor Kit AEM 50 PSIa or 3.5 Bar Stainless Sensor Kit


  • Accuracy: +/- 1% Full Scale over -40C to 105C includes Repeatability, Hysteresis and Linearity
  • Operating Temp: -40C to 105C / -40F to 221F
  • Burst Pressure: 500PSI
  • Response Time: < 1ms
  • Vibration:100 to 2000Hz, 20g Sinusoidal, 3 Axes
  • Sensor Body: Stainless Steel
  • Wetted Materials: 304L & 316L Stainless Steel
  • Thread: 1/8" NPT Male Thread
  • Weight: < 85 Grams
  • Supply Current:
  • Output: .5 to 4.5Vdc Linear
  • Elec. Termination: Integral weatherproof connector, includes mating connector, pins & pin lock
  • Includes: 50 PSIa or 3.5 Bar Stainless Sensor, Connector, Pins, Pin Lock, 1/8" NPT to -4 Adapter & 1/8" NPT to 3/16" Barb Adapter
  • Our Price: $211.40
    AEM  30 PSIa or 2 Bar Stainless Sensor Kit AEM 30 PSIa or 2 Bar Stainless Sensor Kit


  • Accuracy: +/- 1% Full Scale over -40C to 105C includes Repeatability, Hysteresis and Linearity
  • Operating Temp: -40C to 105C / -40F to 221F
  • Burst Pressure: 300PSI
  • Response Time: < 1ms
  • Vibration:100 to 2000Hz, 20g Sinusoidal, 3 Axes
  • Sensor Body: Stainless Steel
  • Wetted Materials: 304L & 316L Stainless Steel
  • Thread: 1/8" NPT Male Thread
  • Weight: < 85 Grams
  • Supply Current:
  • Output: .5 to 4.5Vdc Linear
  • Elec. Termination: Integral weatherproof connector, includes mating connector, pins & pin lock
  • Includes: 30 PSIa or 2 Bar Stainless Sensor, Connector, Pins, Pin Lock, 1/8" NPT to -4 Adapter & 1/8" NPT to 3/16" Barb Adapter
  • Our Price: $215.62
    AEM 15 PSIa or 1 Bar Stainless Sensor Kit AEM 15 PSIa or 1 Bar Stainless Sensor Kit


  • Accuracy: +/- 1% Full Scale over -40C to 105C includes Repeatability, Hysteresis and Linearity
  • Operating Temp: -40C to 105C / -40F to 221F
  • Burst Pressure: 150PSI
  • Response Time: < 1ms
  • Vibration:100 to 2000Hz, 20g Sinusoidal, 3 Axes
  • Sensor Body: Stainless Steel
  • Wetted Materials: 304L & 316L Stainless Steel
  • Thread: 1/8" NPT Male Thread
  • Weight: < 85 Grams
  • Supply Current:
  • Output: .5 to 4.5Vdc Linear
  • Elec. Termination: Integral weatherproof connector, includes mating connector, pins & pin lock
  • Includes: 15 PSIa or 1 Bar Stainless Sensor, Connector, Pins, Pin Lock, 1/8" NPT to -4 Adapter & 1/8" NPT to 3/16" Barb Adapteru
  • Our Price: $215.62
    5 Bar Motorsport MAP Sensor (Stainless Steel Diaphragm) 5 Bar Motorsport MAP Sensor (Stainless Steel Diaphragm)

    THREAD: 1/8 NPT
    INCLUDES: Matching Delphi plug and 3 pins.
    NOTES: Motorsport MAP sensors must not be mounted directly to the inlet manifold, they must be remote mounted and connected via a flexible hose - If required use Pressure Sensor Extension Hose HT-039103
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.

    Our Price: $231.00
    CO2 Boost Control Dual Solenoid & Pressure Sensor Kit CO2 Boost Control Dual Solenoid & Pressure Sensor Kit

    THREAD: 1/8 NPT
    INCLUDES: Two 3 port 33Hz boost control solenoid kits, 150 PSI "TI" wastegate pressure sensor with -4 AN adaptor and "T" fitting.
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.

    Our Price: $394.00