You are here: Home > Engine > Cylinder Head > Camshafts > 12V VR6
Sort By:
Page of 1
Cat Cams 7607220 for 12V VR6 Cat Cams 7607220 for 12V VR6


7607220
sport
Volkswagen AAA
VR-6cyl 2.8L 12v DOHC (DTH/DTH)
Save to PDF
intake
exhaust
camshaft data:
lash ramp
: hydro
hydro
duration @ 0.1mm
: 273
273
duration @ 1.0mm
: 234
234
valve lift
: 11.00mm
11.00mm
cam lift
:
lobe angle
: 120
110
timing @ 1.0mm
: -3 / 57
47 / 7
valve lift @ TDC
: 0.65mm
1.80mm
parts setup:
cam wheels :
:
:
follower
: O.E.M.
: O.E.M.
valve lash
: O.E.M.
: O.E.M.
valve
: O.E.M.
: O.E.M.
valve locks
: O.E.M.
: O.E.M.
upper retainer
: O.E.M.
: O.E.M.
lower retainer
: O.E.M.
: O.E.M.
exterior spring
: O.E.M.
: O.E.M.
interior spring
: O.E.M.
: O.E.M.
fitted load / length
: 35kg @ 33.0mm
: 35kg @ 33.0mm
max. load / lift
: 86kg @ 11.0mm
: 86kg @ 11.0mm
REMARKS :
#
check interference between valve seal and retainer over 10,5mm lift
REMARKS :

Our Price: $495.00
Cat Cams 7607221 for 12V VR6 Cat Cams 7607221 for 12V VR6


7607221
sport
Volkswagen AAA
VR-6cyl 2.8L 12v DOHC (DTH/DTH)
Save to PDF
intake
exhaust
camshaft data:
lash ramp
: hydro
hydro
duration @ 0.1mm
: 285
285
duration @ 1.0mm
: 242
242
valve lift
: 11.05mm
11.05mm
cam lift
:
lobe angle
: 115
115
timing @ 1.0mm
: 6 / 56
56 / 6
valve lift @ TDC
: 1.70mm
1.65mm
parts setup:
cam wheels :
:
:
follower
: O.E.M.
: O.E.M.
valve lash
: O.E.M.
: O.E.M.
valve
: O.E.M.
: O.E.M.
valve locks
: O.E.M.
: O.E.M.
upper retainer
: O.E.M.
: O.E.M.
lower retainer
: O.E.M.
: O.E.M.
exterior spring
: O.E.M.
: O.E.M.
interior spring
: O.E.M.
: O.E.M.
fitted load / length
: 35kg @ 33.0mm
: 35kg @ 33.0mm
max. load / lift
: 86kg @ 11.0mm
: 86kg @ 11.0mm
REMARKS :
#
check interference between valve seal and retainer over 10,5mm lift

Our Price: $495.00
Cat Cams 7607225 for 12V VR6 Cat Cams 7607225 for 12V VR6

7607225
turbo conversion
Volkswagen AAA
VR-6cyl 2.8L 12v DOHC (DTH/DTH)
Save to PDF
intake
exhaust
camshaft data:
lash ramp
: hydro
hydro
duration @ 0.1mm
: 272
271
duration @ 1.0mm
: 233
225
valve lift
: 11.00mm
10.00mm
cam lift
:
lobe angle
: 120
114
timing @ 1.0mm
: -4 / 57
46 / -1
valve lift @ TDC
: 0.65mm
0.95mm
parts setup:
cam wheels :
: View TVW034
: View TVW034
follower
: O.E.M.
: O.E.M.
valve lash
: O.E.M.
: O.E.M.
valve
: O.E.M.
: O.E.M.
valve locks
: O.E.M.
: O.E.M.
upper retainer
: O.E.M.
: O.E.M.
lower retainer
: O.E.M.
: O.E.M.
exterior spring
: O.E.M.
: O.E.M.
interior spring
: O.E.M.
: O.E.M.
fitted load / length
: 35kg @ 33.0mm
: 35kg @ 33.0mm
max. load / lift
: 86kg @ 11.0mm
: 86kg @ 11.0mm
REMARKS :
#
check interference between valve seal and retainer over 10,5mm lift

Our Price: $495.00
Cat Cams 7607222 for 12V VR6 Cat Cams 7607222 for 12V VR6


7607222
sport
Volkswagen AAA
VR-6cyl 2.8L 12v DOHC (DTH/DTH)
Save to PDF
intake
exhaust
camshaft data:
lash ramp
: hydro
hydro
duration @ 0.1mm
: 283
283
duration @ 1.0mm
: 242
242
valve lift
: 11.55mm
11.55mm
cam lift
:
lobe angle
: 116
108
timing @ 1.0mm
: 5 / 57
49 / 13
valve lift @ TDC
: 1.55mm
2.65mm
parts setup:
cam wheels :
:
:
follower
: O.E.M.
: O.E.M.
valve lash
: O.E.M.
: O.E.M.
valve
: O.E.M.
: O.E.M.
valve locks
: O.E.M.
: O.E.M.
upper retainer
: O.E.M.
: O.E.M.
lower retainer
: O.E.M.
: O.E.M.
exterior spring
: View PAC-E99860
: View PAC-E99860
interior spring
: View PAC-I99860
: View PAC-I99860
fitted load / length
: 31kg @ 33.0mm
: 31kg @ 33.0mm
max. load / lift
: 99kg @ 13.0mm
: 99kg @ 13.0mm
REMARKS :
#
check interference between valve seal and retainer over 10,5mm lift
REMARKS :
#
FOR COMPETITION APPLICATIONS ONLY. Following details must be verified:
-
the camshafs must turn smooth in the cylinderhead, provide free travel by machining where needed
-
distance between valve seal and retainer at full lift must be 0.6mm at least
-
minimum valve spring travel of 1.0mm at full lift must be provided
-
distance between valve and piston 1.0mm (pref. 1.5mm). check 5-15 before TDC on exhaust, and after TDC on intake
#
ECU reprogramming required

Our Price: $495.00
Cat Cams 7607223 for 12V VR6 Cat Cams 7607223 for 12V VR6

7607223
hot street - dirt track
Volkswagen AAA
VR-6cyl 2.8L 12v DOHC (DTH/DTH)
Save to PDF
intake
exhaust
camshaft data:
lash ramp
: hydro
hydro
duration @ 0.1mm
: 288
288
duration @ 1.0mm
: 249
249
valve lift
: 12.00mm
12.00mm
cam lift
:
lobe angle
: 112
108
timing @ 1.0mm
: 12 / 57
52 / 17
valve lift @ TDC
: 2.60mm
3.15mm
parts setup:
cam wheels :
:
:
follower
: O.E.M.
: O.E.M.
valve lash
: O.E.M.
: O.E.M.
valve
: O.E.M.
: O.E.M.
valve locks
: O.E.M.
: O.E.M.
upper retainer
: O.E.M.
: O.E.M.
lower retainer
: O.E.M.
: O.E.M.
exterior spring
: View PAC-E99860
: View PAC-E99860
interior spring
: View PAC-I99860
: View PAC-I99860
fitted load / length
: 31kg @ 33.0mm
: 31kg @ 33.0mm
max. load / lift
: 99kg @ 13.0mm
: 99kg @ 13.0mm
REMARKS :
#
check interference between valve seal and retainer over 10,5mm lift
REMARKS :
#
FOR COMPETITION APPLICATIONS ONLY. Following details must be verified:
-
the camshafs must turn smooth in the cylinderhead, provide free travel by machining where needed
-
distance between valve seal and retainer at full lift must be 0.6mm at least
-
minimum valve spring travel of 1.0mm at full lift must be provided
-
distance between valve and piston 1.0mm (pref. 1.5mm). check 5-15 before TDC on exhaust, and after TDC on intake
#
stand alone ECU based on throttle position sensor required

Our Price: $495.00
Cat Cams 7607224 for 12V VR6 Cat Cams 7607224 for 12V VR6


7607224
tarmac rally - race
Volkswagen AAA
VR-6cyl 2.8L 12v DOHC (DTH/DTH)
Save to PDF
intake
exhaust
camshaft data:
lash ramp
: hydro
hydro
duration @ 0.1mm
: 298
298
duration @ 1.0mm
: 258
258
valve lift
: 12.50mm
12.50mm
cam lift
:
lobe angle
: 108
108
timing @ 1.0mm
: 21 / 57
57 / 21
valve lift @ TDC
: 3.75mm
3.75mm
parts setup:
cam wheels :
:
:
follower
: O.E.M.
: O.E.M.
valve lash
: O.E.M.
: O.E.M.
valve
: O.E.M.
: O.E.M.
valve locks
: O.E.M.
: O.E.M.
upper retainer
: O.E.M.
: O.E.M.
lower retainer
: O.E.M.
: O.E.M.
exterior spring
: View PAC-E99860
: View PAC-E99860
interior spring
: View PAC-I99860
: View PAC-I99860
fitted load / length
: 31kg @ 33.0mm
: 31kg @ 33.0mm
max. load / lift
: 99kg @ 13.0mm
: 99kg @ 13.0mm
REMARKS :
#
check interference between valve seal and retainer over 10,5mm lift
REMARKS :
#
FOR COMPETITION APPLICATIONS ONLY. Following details must be verified:
-
the camshafs must turn smooth in the cylinderhead, provide free travel by machining where needed
-
distance between valve seal and retainer at full lift must be 0.6mm at least
-
minimum valve spring travel of 1.0mm at full lift must be provided
-
distance between valve and piston 1.0mm (pref. 1.5mm). check 5-15 before TDC on exhaust, and after TDC on intake
#
stand alone ECU based on throttle position sensor required

Our Price: $495.00
Cat Cams 7607226 for 12V VR6 Cat Cams 7607226 for 12V VR6


7607226
turbo conversion
Volkswagen AAA
VR-6cyl 2.8L 12v DOHC (DTH/DTH)
Save to PDF
intake
exhaust
camshaft data:
lash ramp
: hydro
hydro
duration @ 0.1mm
: 288
285
duration @ 1.0mm
: 249
242
valve lift
: 12.00mm
11.05mm
cam lift
:
lobe angle
: 120
114
timing @ 1.0mm
: 4 / 65
55 / 7
valve lift @ TDC
: 1.50mm
1.80mm
parts setup:
cam wheels :
: View TVW034
: View TVW034
follower
: O.E.M.
: O.E.M.
valve lash
: O.E.M.
: O.E.M.
valve
: O.E.M.
: O.E.M.
valve locks
: O.E.M.
: O.E.M.
upper retainer
: O.E.M.
: O.E.M.
lower retainer
: O.E.M.
: O.E.M.
exterior spring
: View PAC-E99860
: View PAC-E99860
interior spring
: View PAC-I99860
: View PAC-I99860
fitted load / length
: 31kg @ 33.0mm
: 31kg @ 33.0mm
max. load / lift
: 99kg @ 13.0mm
: 99kg @ 13.0mm
REMARKS :
#
check interference between valve seal and retainer over 10,5mm lift
REMARKS :
#
for TURBO conversion (atmospheric to turbo)
#
stand alone ECU based on throttle position sensor required

Our Price: $495.00
Cat Cams 7607312 for 12V VR6 Cat Cams 7607312 for 12V VR6


7607312
tarmac rally - race
Volkswagen AAA
VR-6cyl 2.8L 12v DOHC (DTH/DTH)
Save to PDF
intake
exhaust
camshaft data:
lash ramp
: 0.25mm
0.25mm
duration @ 0.1mm
: 301
301
duration @ 1.0mm
: 254
254
valve lift
: 12.50mm
12.50mm
cam lift
:
lobe angle
: 108
108
timing @ 1.0mm
: 19 / 55
55 / 19
valve lift @ TDC
: 3.65mm
3.65mm
parts setup:
cam wheels :
: View TVW034
:
follower
: View CC005
: View CC005
valve lash
: View TS102
: View TS102
valve
: O.E.M.
: O.E.M.
valve locks
: O.E.M.
: O.E.M.
upper retainer
: O.E.M.
: O.E.M.
lower retainer
: O.E.M.
: O.E.M.
exterior spring
: View PAC-E99860
: View PAC-E99860
interior spring
: View PAC-I99860
: View PAC-I99860
fitted load / length
: 31kg @ 33.0mm
: 31kg @ 33.0mm
max. load / lift
: 99kg @ 13.0mm
: 99kg @ 13.0mm
REMARKS :
#
check interference between valve seal and retainer over 10,5mm lift
REMARKS :
#
FOR COMPETITION APPLICATIONS ONLY. Following details must be verified:
-
the camshafs must turn smooth in the cylinderhead, provide free travel by machining where needed
-
distance between valve seal and retainer at full lift must be 0.6mm at least
-
minimum valve spring travel of 1.0mm at full lift must be provided
-
distance between valve and piston 1.0mm (pref. 1.5mm). check 5-15 before TDC on exhaust, and after TDC on intake
#
- valve clearance is to be adjusted using mechanical lash caps
-
please make sure that the lash cap does not touch the valve locks !
#
stand alone ECU based on throttle position sensor required

Our Price: $495.00
Cat Cams 7607313 for 12V VR6 Cat Cams 7607313 for 12V VR6


7607313
tarmac rally - race
Volkswagen AAA
VR-6cyl 2.8L 12v DOHC (DTH/DTH)
Save to PDF
intake
exhaust
camshaft data:
lash ramp
: 0.25mm
0.25mm
duration @ 0.1mm
: 305
305
duration @ 1.0mm
: 262
262
valve lift
: 13.00mm
13.00mm
cam lift
:
lobe angle
: 106
106
timing @ 1.0mm
: 25 / 57
57 / 25
valve lift @ TDC
: 4.40mm
4.40mm
parts setup:
cam wheels :
: View TVW034
: View TVW034
follower
: View CC005
: View CC005
valve lash
: View TS102
: View TS102
valve
: O.E.M.
: O.E.M.
valve locks
: O.E.M.
: O.E.M.
upper retainer
: O.E.M.
: O.E.M.
lower retainer
: O.E.M.
: O.E.M.
exterior spring
: View PAC-E99860
: View PAC-E99860
interior spring
: View PAC-I99860
: View PAC-I99860
fitted load / length
: 31kg @ 33.0mm
: 31kg @ 33.0mm
max. load / lift
: 99kg @ 13.0mm
: 99kg @ 13.0mm
REMARKS :
#
check interference between valve seal and retainer over 10,5mm lift
REMARKS :
#
FOR COMPETITION APPLICATIONS ONLY. Following details must be verified:
-
the camshafs must turn smooth in the cylinderhead, provide free travel by machining where needed
-
distance between valve seal and retainer at full lift must be 0.6mm at least
-
minimum valve spring travel of 1.0mm at full lift must be provided
-
distance between valve and piston 1.0mm (pref. 1.5mm). check 5-15 before TDC on exhaust, and after TDC on intake
#
- valve clearance is to be adjusted using mechanical lash caps
-
please make sure that the lash cap does not touch the valve locks !
#
stand alone ECU based on throttle position sensor required

Our Price: $495.00
Cat Cams 7607314 for 12V VR6 Cat Cams 7607314 for 12V VR6


7607314
tarmac rally - race
Volkswagen AAA
VR-6cyl 2.8L 12v DOHC (DTH/DTH)
Save to PDF
intake
exhaust
camshaft data:
lash ramp
: 0.25mm
0.25mm
duration @ 0.1mm
: 317
317
duration @ 1.0mm
: 270
270
valve lift
: 13.50mm
13.50mm
cam lift
:
lobe angle
: 106
106
timing @ 1.0mm
: 29 / 61
61 / 29
valve lift @ TDC
: 4.95mm
4.95mm
parts setup:
cam wheels :
: View TVW034
: View TVW034
follower
: View CC005
: View CC005
valve lash
: View TS102
: View TS102
valve
: O.E.M.
: O.E.M.
valve locks
: O.E.M.
: O.E.M.
upper retainer
: O.E.M.
: O.E.M.
lower retainer
: O.E.M.
: O.E.M.
exterior spring
: View PAC-E99860
: View PAC-E99860
interior spring
: View PAC-I99860
: View PAC-I99860
fitted load / length
: 31kg @ 33.0mm
: 31kg @ 33.0mm
max. load / lift
: 99kg @ 13.0mm
: 99kg @ 13.0mm
REMARKS :
#
check interference between valve seal and retainer over 10,5mm lift
REMARKS :
#
FOR COMPETITION APPLICATIONS ONLY. Following details must be verified:
-
the camshafs must turn smooth in the cylinderhead, provide free travel by machining where needed
-
distance between valve seal and retainer at full lift must be 0.6mm at least
-
minimum valve spring travel of 1.0mm at full lift must be provided
-
distance between valve and piston 1.0mm (pref. 1.5mm). check 5-15 before TDC on exhaust, and after TDC on intake
#
- valve clearance is to be adjusted using mechanical lash caps
-
please make sure that the lash cap does not touch the valve locks !
#
stand alone ECU based on throttle position sensor required

Our Price: $495.00
Cat Cams 7607326 for 12V VR6 Cat Cams 7607326 for 12V VR6

7607326
turbo conversion
Volkswagen AAA
VR-6cyl 2.8L 12v DOHC (DTH/DTH)
Save to PDF
intake
exhaust
camshaft data:
lash ramp
: 0.25mm
0.25mm
duration @ 0.1mm
: 295
284
duration @ 1.0mm
: 250
238
valve lift
: 12.00mm
11.50mm
cam lift
:
lobe angle
: 120
114
timing @ 1.0mm
: 5 / 65
53 / 5
valve lift @ TDC
: 1.80mm
1.80mm
parts setup:
cam wheels :
: View TVW034
: View TVW034
follower
: View CC005
: View CC005
valve lash
: View TS102
: View TS102
valve
: O.E.M.
: O.E.M.
valve locks
: O.E.M.
: O.E.M.
upper retainer
: O.E.M.
: O.E.M.
lower retainer
: O.E.M.
: O.E.M.
exterior spring
: View PAC-E99860
: View PAC-E99860
interior spring
: View PAC-I99860
: View PAC-I99860
fitted load / length
: 31kg @ 33.0mm
: 31kg @ 33.0mm
max. load / lift
: 99kg @ 13.0mm
: 99kg @ 13.0mm
REMARKS :
#
check interference between valve seal and retainer over 10,5mm lift
REMARKS :
#
FOR COMPETITION APPLICATIONS ONLY. Following details must be verified:
-
the camshafs must turn smooth in the cylinderhead, provide free travel by machining where needed
-
distance between valve seal and retainer at full lift must be 0.6mm at least
-
minimum valve spring travel of 1.0mm at full lift must be provided
-
distance between valve and piston 1.0mm (pref. 1.5mm). check 5-15 before TDC on exhaust, and after TDC on intake
#
stand alone ECU based on throttle position sensor required

Our Price: $495.00
Cat Cams 7607311 for 12V VR6 Cat Cams 7607311 for 12V VR6


7607311
tarmac rally - race
Volkswagen AAA
VR-6cyl 2.8L 12v DOHC (DTH/DTH)
Save to PDF
intake
exhaust
camshaft data:
lash ramp
: 0.25mm
0.25mm
duration @ 0.1mm
: 293
293
duration @ 1.0mm
: 246
246
valve lift
: 12.00mm
12.00mm
cam lift
:
lobe angle
: 112
108
timing @ 1.0mm
: 11 / 55
51 / 15
valve lift @ TDC
: 2.60mm
3.15mm
parts setup:
cam wheels :
: View TVW034
: View TVW034
follower
: View CC005
: View CC005
valve lash
: View TS102
: View TS102
valve
: O.E.M.
: O.E.M.
valve locks
: O.E.M.
: O.E.M.
upper retainer
: O.E.M.
: O.E.M.
lower retainer
: O.E.M.
: O.E.M.
exterior spring
: View PAC-E99860
: View PAC-E99860
interior spring
: View PAC-I99860
: View PAC-I99860
fitted load / length
: 31kg @ 33.0mm
: 31kg @ 33.0mm
max. load / lift
: 99kg @ 13.0mm
: 99kg @ 13.0mm
REMARKS :
#
check interference between valve seal and retainer over 10,5mm lift
REMARKS :
#
FOR COMPETITION APPLICATIONS ONLY. Following details must be verified:
-
the camshafs must turn smooth in the cylinderhead, provide free travel by machining where needed
-
distance between valve seal and retainer at full lift must be 0.6mm at least
-
minimum valve spring travel of 1.0mm at full lift must be provided
-
distance between valve and piston 1.0mm (pref. 1.5mm). check 5-15 before TDC on exhaust, and after TDC on intake
#
- valve clearance is to be adjusted using mechanical lash caps
-
please make sure that the lash cap does not touch the valve locks !
#
stand alone ECU based on throttle position sensor required

Our Price: $495.00