You are here: Home > Standalone ECU
Choose a sub category:
AEM Accessories AEM Infinity Haltech Accessories
Haltech ECU's Only Haltech Plug 'n' Play ECU Packages Plug 'n' Play Harness Only
Sort By:
Page of 2
AEM Infinity Series Universal Plug And Pin Kit Includes: 80 Pin Connector With Cover Haltech ECU Output - Boost Control Solenoid AEM Infinity Series 5 Universal Mini-Harness With Pre-Wired Power, Grounds, Power Relay, Fuse Box, Single Wideband And AEMnet

AEM offers several different wiring harness types and configurations to simplify the process of wiring the Infinity ECU to your vehicle. When applicable, our wiring harnesses include premium-quality wiring that is wrapped by color-coded, insulated shielding with silk screened functions of the body of each wire. Available wiring harness types include:

  • Universal wiring harnesses
  • Plug & Pin wiring kits
  • Layover harnesses
  • Plug & Play harnesses
The Haltech Boost Control Solenoid allows the user to map boost pressure levels on turbocharged vehicles through the engine management system.

Haltech uses a highly durable short stroke solenoid to increase durability, longevity and of course accuracy of the valve. A high force spring return is used to produce swift valve closing and to prevent valves “blowing” open under high boost applications. Valve movement control (Duty Cycle) map is accessed via the ECU programming software. Raising the duty cycle increases boost pressure, while lowering the duty cycle will reduce boost pressure. The boost control feature allows boost response adjustment for varying turbo sizes.

Depending on the ECU being used some people may want to utilise the gear based boost control feature – this allows separate boost levels to be set at every RPM in every gear. One of the latest features is also the implementation of closed loop boost control where all that needs to be done is tell the ECU exactly what boost to run at each RPM and the computer computes the opening duty cycle of the boost control solenoid automatically – this feature accounts for changes in air temperature, barometric pressure, intercooler heatsoak and any other unexpected factors that may effect inlet air temperature and pressures.

With the continual improvement and innovation consistently going into all of Haltech ECU’s in the area of boost control its hard to imagine how your turbocharged engine ever lived without a Haltech boost control solenoid!

Universal Wiring Harness

  • For Infinity 506 #017-30-7106, 508 #017-30-7108.
  • Haltech WB1 - Single Channel CAN O2 Wideband Controller Kit Elite 2000/2500 Lexus IS300 2JZ GE VVTi (2001 USA models only) Parallel Adaptor Harness Elite 2000/2500 Lexus IS300 2JZ GE VVTi (2002-05 USA models only) Parallel Adaptor Harness
    LENGTH: 1.2M (4ft)
    INCLUDES: Single Channel, CAN Wideband Controller, 4.9LSU Sensor, CAN Cable (4'/1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide.
    NOTES: Ideal CAN expansion accessory for all Elite Series ECUs.
    SUITS: Parallel (piggy-back) install in conjunction with the factory ECU for Lexus IS300 2JZ GE VVTi (2001 USA models only) with automatic or manual transmissions.
    INCLUDES: Parallel adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, extension harness for optional GM 3 or 4 BAR MAP sensor upgrade.
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.
    OVERVIEW
    If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug’n’Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
    • A simple Haltech adaptor harness that allows you to be up and running in just a few hours.
    • The quick start guide will walk you through installation of the Haltech adaptor into your vehicle.
    • The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
    FEATURES
    • This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
    • Fully programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
    SUITS: Parallel (piggy-back) installation in conjuction with the factory ECU for Lexus IS300 2JZ GE VVTi (2002-2005) (USA models only) with automatic or manual transmissions.
    INCLUDES: Parallel adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, extension harness for optional GM 3 or 4 BAR MAP sensor upgrade.
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.
    FEATURES
    • This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
    • Fully programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
    Elite 1000/1500 Honda OBD-I B-Series Plug 'n' Play Adaptor Harness Elite 1500 VW/Audi 1.8T AWP ONLY (2001-2006) Plug 'n' Play Adaptor Harness Elite 1000-2500 Mazda RX7 FD3S-S7&8 Plug 'n' Play Adaptor Harness
    SUITS: Plug 'n' Play replacement of the factory ECU for Honda OBD-I B-Series 92-95 Civic, Integra and Prelude. 90-95 Accord. Manual transmission only.
    INCLUDES: Injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.

    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.


    OVERVIEW
    If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
    • simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
    • quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
    • guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
    FEATURES
    • harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
    • programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
    SUITS: Plug 'n' Play replacement of the factory ECU for VW/Audi 1.8T AWP ONLY (2001-2006) Volkswagen Golf Mk4 GTI, Bora/Jetta, Beetle, Polo GTI, Audi A3, A4 Quattro Sport, TT Mk1 (8N), Skoda Octavia vRS & SEAT Leon, Toledo. Manual transmission only.
    INCLUDES: Injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
    NOTES: The CAN dash support was developed on a 2003 VW Beetle - other models may not be supported or have reduced dash functionality.
    OVERVIEW
    If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
    • A simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
    • The quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
    • The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
    FEATURES
    • This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
    • Fully programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.

      MAY TAKE 1-3 WEEKS TO SHIP
    SUITS: Plug 'n' Play replacement of the factory ECU for Mazda RX7 FD3S-S7&8 (96-02) 4 row ECU plug. Manual transmission only.
    INCLUDES: Injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.


    OVERVIEW
    If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
    • simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
    • quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
    • guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
    FEATURES
    • harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
    • programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
    Elite 1000/1500 Mitsubishi EVO 1-3 Plug 'n' Play Adaptor Harness Elite 1000/1500 Nissan Silvia S13 (CA18DET) Plug 'n' Play Adaptor Harness Elite 1000/1500 Nissan Silvia S13 and 180SX (SR20DET) Plug 'n' Play Adaptor Harness
    SUITS: Plug 'n' Play replacement of the factory ECU for Mitsubishi EVO 1-3 GSR/RVR. Manual transmissions only.
    INCLUDES: Injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.

    OVERVIEW
    If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
    • simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
    • quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
    • guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
    FEATURES
    • harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
    • programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
    Availability: Low stock - order now
    SUITS: Plug 'n' Play replacement of the factory ECU for Nissan Silvia S13 (CA18DET) Manual transmission only.
    INCLUDES: Injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.


    OVERVIEW
    If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
    • simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
    • quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
    • guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
    FEATURES
    • harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
    • programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
    SUITS: Plug 'n' Play replacement of the factory ECU for Nissan Silvia S13 and 180SX (SR20DET) Manual transmission only.
    INCLUDES: Injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.

    OVERVIEW
    If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
    • simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
    • quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
    • guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
    FEATURES
    • harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
    • programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
    Elite 1000/1500 Nissan Silvia S14 S1 "ZENKI" Plug 'n' Play Adaptor Harness Elite 1000/1500 Subaru WRX MY99-00 Plug 'n' Play Adaptor Harness Elite 1000/1500 Subaru WRX MY97-98 Plug 'n' Play Adaptor Harness
    SUITS: Plug 'n' Play replacement of the factory ECU for Nissan Silvia S14 S1 "ZENKI" Manual transmission only.
    INCLUDES: Injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.


    OVERVIEW
    If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
    • simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
    • quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
    • guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
    FEATURES
    • harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
    • programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
    SUITS: Plug 'n' Play replacement of the factory ECU for Subaru WRX MY99-00 (Australian Delivered and JDM) Manual transmission only.
    INCLUDES: Injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.

    OVERVIEW
    If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
    • simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
    • quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
    • guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
    FEATURES
    • harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
    • programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
    SUITS: Plug 'n' Play replacement of the factory ECU for Subaru WRX MY97-98 (Australian Delivered and JDM) Manual transmission only.
    INCLUDES: Injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.
    OVERVIEW
    If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
    • simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
    • quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
    • guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
    FEATURES
    • harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
    • programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
    Elite 1000/1500 Subaru WRX MY93-96 & Liberty RS Plug 'n' Play Adaptor Harness Elite 1000/1500 Honda Integra DC5 Plug 'n' Play Adaptor Harness Elite 1000/1500 Mazda Miata (MX-5) NB Plug'n'Play Adaptor Harness
    SUITS: Plug 'n' Play replacement of the factory ECU for Subaru WRX MY93-96 & Liberty RS Manual transmission only.
    INCLUDES: Injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.
    OVERVIEW
    If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
    • simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
    • quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
    • guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
    FEATURES
    • harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
    • programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
    SUITS: Plug 'n' Play replacement of the factory ECU for Honda Integra DC5/Acura RSX 05-06 Manual transmission only. (Does not support factory multiplexed coolant temperature gauge, battery light and AC request - Please see the product quick start guide for further information)
    INCLUDES: Injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
    NOTES: Does not support factory multiplexed coolant temperature gauge, battery light and AC request - Please see the quick start guide for further information. Elite 1000 ECU does NOT support the factory intake runner control & check engine light. Please use the Elite 1500 if these functions are required.
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.
    OVERVIEW
    If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
    • simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
    • quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
    • guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
    FEATURES
    • harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
    • programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
    SUITS: Mazda Miata (MX-5) NB ADM Special Edition (Factory Turbo), USDM Special Edition (Factory Turbo), VCT, Non-VCT (00-04 Aust, 01-05 USA). 3-plug, 3-row factory ECU. Manual transmission only.
    INCLUDES: Plug'n'Play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.
    OVERVIEW
    HARNESS OVERVIEW
    If you are using a factory harness and are after an easy ECU upgrade - this is a product for you. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
    • A simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
    • The quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
    FEATURES
    HARNESS FEATURES
    • This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
    • Fully programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
    Elite 1000/1500 Nissan 200SX/Silvia S15 & S14A S2 Plug 'n' Play Adaptor Harness Elite 1500 Polaris Slingshot (2015-2016) Plug'n'Play Adaptor Harness Elite 2000/2500 Nissan Skyline R32/33/R34 GT-R Plug'n'Play Adaptor Harness
    SUITS: Plug 'n' Play replacement of the factory ECU for Nissan 200SX/Silvia S15 (Australian Delivered and JDM) 200SX/Silvia S14A S2 "KOUKI" 180SX S13 Rev 3 "Type X" 1996 onwards Pulsar N15 and N14 SSS and GTI-R Micra K11 (CG13DE) Manual transmissions only.
    INCLUDES: Injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.
    OVERVIEW
    If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
    • simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
    • quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
    • guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
    FEATURES
    • harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
    • programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
    SUITS: Plug'n'Play replacement of the factory ECU for Polaris Slingshot (2015-2016). Connects directly with a Haltech Elite 1500 ECU.
    INCLUDES: Plug'n'Play adaptor harness and M14 x 1.5 air temp sensor.
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.
    OVERVIEW
    If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
    • A simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
    • The Quick Start Guide will walk you through installation of the Haltech Plug'n'Play Adaptor into your vehicle.
    • The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
    FEATURES
    • This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
    • Fully programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
    SUITS: Nissan Skyline R32 GTS-T, R32 GT-R, R33 GTS-T, R33 GT-R, R34 GT-R
    INCLUDES: Plug'n'Play adaptor harness. M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
    NOTES: Manual transmission only.
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.
    OVERVIEW
    ADAPTOR OVERVIEW
    This adaptor plugs directly into your Haltech Elite ECU and has a set of factory connectors on the other side which plug straight into the factory harness. A quick and easy plug'n'play upgrade solution.
    • This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
    • Fully programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.Â
    • The quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
    • When purchased as a kit with a Haltech ECU, this product is accompanied by the full ECU manual and Software located on the CD or USB key.
    FEATURES
    SUPPORTED OEM FUNCTIONALITY
    • Idle Control (BAC)
    • Thermofan
    • Tachometer
    • A/C Request And Control
    • Engine Control Relay
    • Injector MFD
    • Fuel Pump
    • Power Steering Switch
    • Knock Sensors 1 & 2
    • Wastegate Control
    • AFM Front & Rear
    • Coolant Temperature Sensor
    • Air Temperature Sensor
    • O2 Sensor Front & Rear
    • Check Engine Light
    • Throttle Position Sensor
    • Ignition Input
    • Vehicle Speed Sensor
    • Nissan Variable Cam System (RB25DET only)
    • Variable High And Low RPM/Load Fuel Pump Voltage Control
    • ATTESA AWD (TPS Output)
    Elite 2000/2500 Nissan R34 GT-T, Stagea WC34 Plug'n'Play Adaptor Harness Elite 2500 Subaru WRX MY06-10 Plug 'n' Play Adaptor Harness Kit Elite 2000/2500 Toyota Chaser JZX100 (1JZ-GTE) Plug 'n' Play Adaptor Harness Kit Part Number: HT-141246
    SUITS: Nissan Skyline R34 GT-T, Stagea WC34 Series.
    INCLUDES: Injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
    NOTES: Manual transmission only.
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.
    OVERVIEW
    HARNESS OVERVIEW
    If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
    • A simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
    • The quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
    • When purchased in a kit with a Haltech ECU, this product is accompanied by the full ECU manual and Software located on the CD or USB key.
    FEATURES
    OEM FUNCTIONALITY SUPPORTED
    • ATTESA AWD system
    • Throttle Position Sensor
    • Turbo Pressure Signal
    • Power Steering Switch
    • Tachometer
    • Engine Control Relay
    • Wastegate Solenoid
    • Check Engine Light
    • Idle Air Control
    • Coolant Temp
    • A/C Control
    • A/C Pressure
    • Cooling Fan
    • Vehicle Speed
    • Narrowband O2
    • Electrical Load Switch
    • Fuel Pump Voltage Control
    • Fuel Pump Relay Output
    • Knock Sensor 1
    • Knock Sensor 2
    • Mass Air Flow
    • VCT Solenoid
    SUITS: Plug 'n' Play replacement of the factory ECU for Subaru WRX MY06-10 STI MY06-07 2.5 Litre with DENSO ECU only.
    INCLUDES: Injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
    NOTES: Not compatible with the Hitachi ECU.
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.
    OVERVIEW
    If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
    • simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
    • quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
    • guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
    FEATURES
    • harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
    • programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
    SUITS: Plug 'n' Play replacement of the factory ECU for Toyota Mark II/Cresta/Chaser JZX100 1JZ-GTE VVT-I (JDM) Soarer (MY96-01) JZZ30 1JZ-GTE VVT-I (JDM) Manual transmissions only.
    INCLUDES: Elite 2500 ECU with DBW and Race Functions, injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins, USB programming cable and software CD.
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.
    OVERVIEW
    If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
    • simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
    • quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
    • guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
    FEATURES
    • harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
    • programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
    Elite 1000/1500 Plug'n'Play Adaptor Harness for Honda S2000 Elite 750 Nissan Patrol Y60 & Y61 (TB45) Plug 'n' Play Adaptor Harness Elite 750 Mazda Miata (MX-5) NB Plug'n'Play Adaptor Harness
    SUITS: Honda S2000 AP1 (00-04), AP2 (05) non-DBW
    INCLUDES: Plug'n'Play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
    NOTES: Non Drive-By-Wire (DBW) application only.
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.
    OVERVIEW
    ADAPTOR OVERVIEW
    This adaptor plugs directly into your Haltech Elite ECU and has a set of factory connectors on the other side which plug straight into the factory harness. A quick and easy plug'n'play upgrade solution.
    • A simple Haltech Plug'n'Play product that allows plugs directly into your car's factory harness.
    • The quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
    • When purchased as a kit with a Haltech ECU, this product is accompanied by the full ECU manual and Software located on the CD or USB key.
    FEATURES
    SUPPORTED OEM FUNCTIONALITY:
    • Idle Control (BAC)
    • Thermofan
    • Tachometer
    • A/C Request and Control
    • Engine Control Relay
    • Fuel Pump
    • Electrical Power Steering Load Detect
    • Knock Sensor 1
    • Coolant Temperature Sensor
    • Air Temperature Sensor
    • O2 Sensor Front & Rear
    • Check Engine Light
    • Throttle Position Sensor
    • Vehicle Speed Sensor
    • VTEC Oil Pressure Switch
    • VTEC Solenoid
    • Air Pump Relay (E1500 Only)
    • Factory Map Sensor
    • Alternator Control
    • Brake Pedal Switch
    • Electrical Load Detect
    • S2000 Coolant Gauge
    SUITS: Plug 'n' Play replacement of the factory ECU for Nissan Patrol/Safari Y60 and Y61 with automatic or manual transmissions. (No shift re-programming/control etc) TB45E Only.
    INCLUDES: Injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
    NOTES: Spare ignition outputs can be used (via custom wiring) to convert from distributor to direct fire ignition system. (6 individual coils)
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.
    OVERVIEW
    If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
    • simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
    • quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
    • guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
    FEATURES
    • harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
    • programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
    SUITS: Mazda Miata (MX-5) NB 1.8L Non VCT or VCT (00-04) 1.8L Factory Turbo SE (Aus), Mazdaspeed (04-05 USA) with 3-plug 3-row factory ECU. Manual transmission only.
    INCLUDES: Plug'n'Play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins. waterproof USB cap, USB programming cable and software CD.
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.
    OVERVIEW
    HARNESS OVERVIEW
    If you are using a factory harness and are after an easy ECU upgrade - this is a product for you. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
    • A simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
    • The quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
    FEATURES
    HARNESS FEATURES
    • This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
    • Fully programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
    Elite 1500 Yamaha WaveRunner FX, FZS, FZR Plug 'n' Play Adaptor Harness Elite 2000/2500 Ford Mustang GT & Cobra (1999-2004) Plug 'n' Play Adaptor Harness Elite 1500 Polaris RZR XP 1000 (2015-2016) Plug 'n' Play Adaptor Harness
    SUITS: Plug 'n' Play replacement of the factory ECU for Yamaha WaveRunner FX, FZS, FZR (2008-2014)
    INCLUDES: Molded polyurethane plug 'n' play adaptor harness,mounting bracket and waterproof CAN USB extension.
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.
    OVERVIEW
    If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
    • simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
    • quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
    • guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
    FEATURES
    • harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
    • programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
    SUITS: Plug 'n' Play replacement of the factory ECU for Ford Mustang GT & Cobra (1999-2004) with automatic or manual transmissions.
    INCLUDES: Molded polyurethane plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, pre-wired HPI8 15AMP 8CH ignition module and extension harness for optional GM 3 or 4 BAR MAP sensor upgrade.
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.
    OVERVIEW
    If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
    • simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
    • quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
    • guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
    FEATURES
    • harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
    • programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
    SUITS: Plug 'n' Play replacement of the factory ECU for Polaris RZR XP 1000 (2015-2016)
    INCLUDES: Molded polyurethane plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins and pre-wired dual channel ignition module.
    IMPORTANT EMISSIONS NOTICE:
    In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.
    OVERVIEW
    If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
    • simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
    • quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
    • guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
    FEATURES
    • harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
    • programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.