You are here: Home > Intake Manifold Accessories
Sort By:
Page of 2
Aluminum Fuel Injector Bung Aluminum Fuel Injector Bung

Our Fuel Injector bungs are machined from 6061-T6 aircraft quality aluminum. These are perfect for those looking into doing a EFI conversion on a carbureted motor. Setup for 14mm Oring or Bosch style injectors these are a must have for anyone looking for a simple easy way of fabricating a way to hold the manifold side of the injector. At 2" in length, these are perfect for cutting down to size for differing applications. Please set your quantity to how many you would like to purchase.

Our Price: $4.45
1-3/4 OD x .125 Wall Tubing 1-3/4 OD x .125 Wall Tubing

Our 1 3/4 OD x .125 Wall tube is extruded from 6061 aircraft quality aluminum. This material is perfect for custom intake builds with a smaller port shape on the head. This material works in conjunction with our 1.75 velocity stacks for simple installation.
Material is sold per foot.When ordering set the quantity field to the amount of feet you would like to purchase.


**Specific Shipping info -
UPS domestic shipping max length is 6ft. We have to charge $7.00 extra per package for lengths over 58".
USPS international shipping limits max length to 44 inches. If ordering large quantities, please specify saw cut lengths that will stay under the 44" max length.

Our Price: $8.75
Dash 6 Fuel Rail Extrusion Dash 6 Fuel Rail Extrusion

Dash 6 Fuel Rail Extrusion is extruded from 6063 aircraft quality aluminum. The Dash 6 Extrusion shown above has an internal bore diameter of .500" with an overall external size of .875" wide x 1.250" tall. The rail stock is sold per foot, with minimum orders of 2 foot required. Please set your quantity to the amount of feet you would like to purchase. We do offer price breaks on larger quantities, please inquire if interested. We also have Injector Port Tools available.

**Specific Shipping info -
UPS domestic shipping max length is 6ft. If ordering quantities over 6ft, please specify saw cut lengths that will stay under the 6 foot max length.

Our Price: $9.60
Dash 8 Fuel Rail Extrusion Dash 8 Fuel Rail Extrusion

Dash 8 Fuel Rail Extrusion is extruded from 6063 aircraft quality aluminum. The Dash 8 Extrusion shown above has an internal bore diameter of .690" with an overall external size of .875" wide x 1.40" tall. The rail stock is sold per foot, with minimum orders of 2 foot required. Please set your quantity to the amount of feet you would like to purchase. We do offer price breaks on larger quantities, please inquire if interested. We also have Injector Port Tools available.


**Specific Shipping info -
UPS domestic shipping max length is 6ft. If ordering quantities over 6ft, please specify saw cut lengths that will stay under the 6 foot max length.

USPS international shipping limits max length to 42 inches. If ordering large quantities, please specify saw cut lengths that will stay under the 42" max length.

Our Price: $10.50
Dash 10 Fuel Rail Extrusion Dash 10 Fuel Rail Extrusion

Dash 10 Fuel Rail Extrusion is extruded from 6063 aircraft quality aluminum. The Dash 10 Extrusion shown above has an internal bore diameter of .800" with an overall external size of 1.125" wide x 1.5" tall. The rail stock is sold per foot, with minimum orders of 1 foot required. Please set your quantity to the amount of feet you would like to purchase. We do offer price breaks on larger quantities, please inquire if interested.

**Specific Shipping info -
UPS domestic shipping max length is 6ft. If ordering quantities over 6ft, please specify saw cut lengths that will stay under the 6 foot max length.

USPS international shipping limits max length to 42 inches. If ordering large quantities, please specify saw cut lengths that will stay under the 42" max length.

Our Price: $11.50
1/2" x 4" 6061-T6 Flange Plate Material 1/2" x 4" 6061-T6 Flange Plate Material

2 ft. minimum purchase

**Specific Shipping info - UPS limits max length to 6ft. USPS international shipping limits max length to 46 inches. If ordering large quantities, please specify saw cut lengths that will stay under the max length.

Our Price: $11.70
2.25" OD x .125 Wall Tubing 2.25" OD x .125 Wall Tubing

Our 2.25 OD x .125 Wall tube is extruded from 6061 aircraft quality aluminum. This material is perfect for custom intake builds with a smaller port shape on the head. This material works in conjunction with our 2.25 velocity stacks for simple installation. Material is sold per foot.When ordering set the quantity field to the amount of feet you would like to purchase.

Our Price: $14.40
Universal Oval Runner Extrusion Universal Oval Runner Extrusion

Exclusive to RMR, our new Oval Runner tubing is extruded from 6063 aircraft quality aluminum. This material is perfect for custom intake builds with a oval port shape. This material works in conjunction with our oval velocity stack for simple installation. Material is sold per foot. When ordering set the quantity field to the amount of feet you would like to purchase.

**Specific Shipping info -
UPS domestic shipping max length is 6ft. If you order more than 6ft. tell us how you want it cut, unless the order is for an even amount of 6ft. lengths.
USPS international shipping limits max length to 42 inches. If ordering large quantities, please specify saw cut lengths that will stay under the 42" max length.i

Our Price: $14.50
Universal Fuel Rail Clamp Universal Fuel Rail Clamp

Our Fuel Rail Clamps are machined from 6061-T6 aircraft quality aluminum. These are perfect for those looking into custom clamps for aftermarket intake builds. These are set up for the long 60.3mm Bosch type injectors. Why make a flimsy sheet metal clamp for your fuel rail when you can accent your build with these sturdy billet clamps.

Our Price: $14.60
Rectangular runner tubing Rectangular runner tubing

Exclusive to RMR, our new Rectangular Runner Tubing is extruded fromT6 6063 aircraft quality aluminum. This material is perfect for custom intake builds for the 2005 and up Ford 4.6 3 valve modular motor and the New Chevrolet LS3 motor found in the 2008 and up Corvette and 2010 SS Camaro.
This material is sold per foot. When ordering set the quantity field to the amount of feet you would like to purchase.

**Specific Shipping info -
UPS domestic shipping max length is 6ft. Please note in the order the lengths you need this material cut to.
USPS international shipping limits max length to 36 inches. If ordering large quantities, please specify saw cut lengths that will stay under the 36" max length.

Our Price: $16.50
Universal Half Round End Cap (Without Vac. Holes) Universal Half Round End Cap (Without Vac. Holes)

The universal half round end cap is machined from 6061 aircraft quality aluminum. The end cap is designed to fit the profile of our half round plenum extrusion for easy mock up and welding. This in conjunction with our half round plenum material helps you make a manifold that you can build yourself.

Our Price: $18.99
5" D Plenum Weld-on End Cap 5" D Plenum Weld-on End Cap

The D shape end cap is machined from 6061 aircraft quality aluminum. The end cap is designed to match the profile of our D plenum extrusion for easy mock up and welding. This in conjunction with our other manifold parts make for an easy, clean, and different looking manifold that you can build yourself.

Our Price: $19.25
Skunk2 Ultra Race Plenum Gasket Skunk2 Ultra Race Plenum Gasket

Replacement gasket for Ultra Race manifolds to plenum or manifold/ plenum to spacer.

Our Price: $19.75
Skunk2 Ultra Street Plenum Gasket Skunk2 Ultra Street Plenum Gasket

Replacement gasket for Ultra Street manifold to plenum or manifold/ plenum to spacer.

Our Price: $19.75
Half Round Plenum Vacuum Endcap Half Round Plenum Vacuum Endcap

The Universal Half round vacuum end cap is machined from 6061 aircraft quality aluminum. The end cap is designed to key into the profile of our half round plenum extrusion for easy mock up and welding. It comes pre-machined with three 1/2" NPT holes for easy installation of hose barbs for all of your vacuum lines. This in conjunction with our other manifold parts make for an easy, clean, and different looking manifold that you can build yourself.

Our Price: $28.50
Universal Oval velocity Stacks Universal Oval velocity Stacks

The Oval Velocity Stack is machined out of solid 6061 aircraft quality aluminum. This velocity stack is designed to be used in conjunction with our new Oval Runner Extrusion and any of our intake plenum materials. Perfect for all of those builds that have oval ports on the head. Where you may have once been stuck converting to a round runner shape, now you can maintain a solid shape throughout. Even though the stack is oval, mock-up and installation still utilizes nothing more then a 3" hole saw. With that in mind, we try to make every stage of building the manifold, from mockup to welding as easy as possible.

Our Price: $38.05
2.00" OD Velocity Stacks 2.00" OD Velocity Stacks

The 2.00" OD Velocity Stack is machined from 6061 aircraft quality aluminum. This is designed specifically for either of our plenum materials and our 2" OD 6061 Aluminum tubing. Designed like the rest of our velocity stacks in the fact that all you need is a 3" hole saw a to install these. These are made to key to the bottom of the plenum material and allow for seamless joints both at the top of the stack and base where the runner begins.i

Our Price: $38.25
2.25" Velocity Stacks 2.25" Velocity Stacks

The 2.25" OD Velocity Stack is machined from 6061 aircraft quality aluminum. This is designed specifically for either of our plenum materials and our 2-1/4" OD 6061 Aluminum tubing. Designed like the rest of our velocity stacks in the fact that all you need is a 3" hole saw to install these. These are made to key to the bottom of the plenum material and allow for seamless joints both at the top of the stack and base where the runner begins.

Our Price: $38.25
Universal Intake Extrusion Half Round Universal Intake Extrusion Half Round

The Half Round Plenum Extrusion is extruded from 6063 aluminum. The Extrusion shown above has an internal diameter of 3.5" with an overall external size of 4.00" wide x 4.00" tall. The extrusion is perfect for either one off manifold buildups or for someone looking to produce and market their own Intake Manifold design.The Half round design is ideal for tight engine bays where clearance with the hood or firewall is an issue. Please set your quantity to the amount of feet you would like to purchase.

Now sold by the inch. when more then 12 inches are purchased
12 inch. minimum purchase required


**Specific Shipping info - UPS max length 6ft. USPS international shipping limits max length to 42 inches. If ordering large quantities, please specify saw cut lengths that will stay under the max length.

Our Price: $39.06
Universal 5 Inch D Plenum Universal 5 Inch D Plenum

The D shape plenum material is extruded from 6063 aluminum. This plenum material is designed with forced induction in mind. Large 4.5" ID offers maximum plenum volume for turbo or supercharged applications. The unique D shape makes it easy for one off fabrication of a manifold while still keeping the performance to a maximum. Quarter inch wall thickness insures strength compared to hand building a sheet metal intake. When ordering set the quantity field to the amount of feet you would like to purchase.
Click here for matching throttle body flange

Now sold by the foot.

Our Price: $42.05
Infinity Q45 Throttle Body Plate Specific for D Plenum Infinity Q45 Throttle Body Plate Specific for D Plenum

The Q45 throttle body plate is machined from 6061 aircraft quality aluminum.
With an inside diameter of 82.5mm.
Specifically designed to fit our5" D Plenum material

Our Price: $48.25
LS1 Throttle Body Adapter LS1 Throttle Body Adapter

Our LS1 throttle body plate is cnc machined from 6061 aircraft quality aluminum. Specifically designed to fit our 5" D shaped Plenum Material.i

Our Price: $48.25
75mm Universal TB Plate 75mm Universal TB Plate

5.0L 86'-93' 75mm Mustang TB Adapter
Machined from 6061 aircraft quality aluminum.
Fits our Half Round and D Plenum material.

Our Price: $48.25
90mm TB Plate Specific for D Plenum 90mm TB Plate Specific for D Plenum

90mm Mustang 5.0 TB Adapter
Machined from 6061 aircraft quality aluminum.
Specifically designed to fit our 5" D Plenum material only.

Our Price: $48.25
90mm Universal TB Plate 90mm Universal TB Plate

90mm 5.0 Mustang TB Adapter
Machined from 6061 aircraft quality aluminum.
Fits our "D" plenum when modified. Determine the position you want to clock your throttle body, then you must remove part of the lip on the back side of the adapter to match the flat bottom of plenum.

Our Price: $48.25
IE Water Meth Throttle Plate | Fits VW and Audi 2.0TFSI like GTI, A4 IE Water Meth Throttle Plate | Fits VW and Audi 2.0TFSI like GTI, A4

Drilling and tapping into the factory 2.0T FSI/TSI plastic intake manifold for water/meth ports often leads to leaks or cracked and broken manifolds. Skip the trouble with IE's easy no-fuss water/meth throttle body spacer solution.

Make installation of your water meth kit a simple job. This plate gets sandwiched between the throttle body and intake manifold, allowing you to run a 1/8" NPT nozzle right after the throttle body. Manufactured from 6061 aircraft grade aluminum and finished with a bright black anodize. Kit includes all necessary extended hardware, and gasket for quick installation.

PRODUCT FEATURES

  • Easy water/meth installation solution
  • Optimized flow location for water/meth nozzle
  • Includes hardware for OE and IE intake manifolds
  • Long-life and stealth bright black anodized finish
  • 1/8" NPT threaded port fits most water/meth nozzles
  • In-house CNC machined aluminum

INCLUDES REQUIRED HARDWARE

  • Includes coarse screw extended hardware for OEM plastic intake manifold
  • Includes M6 socket head screw extended hardware for IE cast aluminum intake manifold

Our Price: $75.99
IE Phenolic 1.8T Large Port to Small Port Adapter Kit IE Phenolic 1.8T Large Port to Small Port Adapter Kit

-Smooth transition between manifold and cylinder head port sizes
-Decreases intake temperatures and increases horsepower
-12.5mm thickness decreases heat transfer drastically
-Easily install your IE Transverse 1.8T Intake Manifold on a small port head

IE's phenolic transition spacer for your 1.8T engine delivers a smooth transition when installing a large port intake manifold to a small port cylinder head. The 12.5mm heat resistant material also acts as a phenolic spacer greatly reducing intake air temperatures increasing power. Includes all new extended hardware and two new intake manifold gaskets.

Our Price: $93.99
Skunk2 Ultra Street Plenum Spacer - Black Skunk2 Ultra Street Plenum Spacer - Black

The Skunk2 Racing Plenum Spacer is used to increase the internal volume of the Ultra "Street" Intake Manifolds by .50 Liters.

INCLUDES:

.50L Billet Aluminum Spacer
Longer Socket Head Hardware
Gaskets

Our Price: $102.99