Home > Standalone ECU > Plug 'n' Play Harness Only >

Elite 2000/2500 Nissan Skyline R32/33/R34 GT-R Plug'n'Play Adaptor Harness
Elite 2000/2500 Nissan Skyline R32/33/R34 GT-R Plug'n'Play Adaptor Harness


 
Our Price: $545.99


Product Code: SB-HT-141357
Qty:

Description
 
SUITS: Nissan Skyline R32 GTS-T, R32 GT-R, R33 GTS-T, R33 GT-R, R34 GT-R
INCLUDES: Plug'n'Play adaptor harness. M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins.
NOTES: Manual transmission only.
IMPORTANT EMISSIONS NOTICE:
In many states, it is unlawful to tamper with your vehicle's emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.
OVERVIEW
ADAPTOR OVERVIEW
This adaptor plugs directly into your Haltech Elite ECU and has a set of factory connectors on the other side which plug straight into the factory harness. A quick and easy plug'n'play upgrade solution.
  • This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
  • Fully programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.Â
  • The quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
  • When purchased as a kit with a Haltech ECU, this product is accompanied by the full ECU manual and Software located on the CD or USB key.
FEATURES
SUPPORTED OEM FUNCTIONALITY
  • Idle Control (BAC)
  • Thermofan
  • Tachometer
  • A/C Request And Control
  • Engine Control Relay
  • Injector MFD
  • Fuel Pump
  • Power Steering Switch
  • Knock Sensors 1 & 2
  • Wastegate Control
  • AFM Front & Rear
  • Coolant Temperature Sensor
  • Air Temperature Sensor
  • O2 Sensor Front & Rear
  • Check Engine Light
  • Throttle Position Sensor
  • Ignition Input
  • Vehicle Speed Sensor
  • Nissan Variable Cam System (RB25DET only)
  • Variable High And Low RPM/Load Fuel Pump Voltage Control
  • ATTESA AWD (TPS Output)

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Standalone ECU > Plug 'n' Play Harness Only
Standalone ECU