You are here: Home > Engine > Bottom End > Piston / Rod Kits
Sort By:
Page of 2
1.8T Wiseco / IE Rods Combo - 82MM Bore, 86.4mm Stroke, 9 : 1 CR 1.8T Wiseco / IE Rods Combo - 81.5MM Bore, 86.4mm Stroke, 9 : 1 CR 1.8T Wiseco / IE Rods Combo - 81MM Bore, 86.4mm Stroke, 9 : 1 CR
1.8T Wiseco / IE Rods Combo - 82MM Bore, 86.4mm Stroke, 9 : 1 CR
List Price: $1,073.56
Our Price: $864.95
Save $208.61!
1.8T Wiseco / IE Rods Combo - 81.5MM Bore, 86.4mm Stroke, 9 : 1 CR
List Price: $1,073.56
Our Price: $864.95
Save $208.61!
1.8T Wiseco / IE Rods Combo - 81MM Bore, 86.4mm Stroke, 9 : 1 CR
List Price: $1,073.56
Our Price: $864.95
Save $208.61!
This is a piston and rod combo pack for 1.8t 20v engines. It includes a set of IE's high quality forged 4340 H beam connecting rods, and a set of Wiseco forged pistons. Wiseco pistons are an excellent value, using high quality forging and machining. They are made from 4032 aluminum alloy which has less thermal expansion then 2618, but is not quite as strong. This allows a tighter motor to be built. They also feature beautiful machine work and fit and finish. In addition, IE's connecting rods are proven to 750+ BHP for the light weight H beam design and are carefully inspected. IE goes a notch beyond most connecting rod manufacturers in that they actually perform destructive testing on their connecting rods to ensure that every production run is up to par.



Features
IE Forged 4340 H Beam Con-Rods
Wiseco Pistons
Includes 4 rods, 4 pistons, wrist pins, rings, and clips
Fits All 1.8t's
This is a piston and rod combo pack for 1.8t 20v engines. It includes a set of IE's high quality forged 4340 H beam connecting rods, and a set of Wiseco forged pistons. Wiseco pistons are an excellent value, using high quality forging and machining. They are made from 4032 aluminum alloy which has less thermal expansion then 2618, but is not quite as strong. This allows a tighter motor to be built. They also feature beautiful machine work and fit and finish. In addition, IE's connecting rods are proven to 750+ BHP for the light weight H beam design and are carefully inspected. IE goes a notch beyond most connecting rod manufacturers in that they actually perform destructive testing on their connecting rods to ensure that every production run is up to par.



Features
IE Forged 4340 H Beam Con-Rods
Wiseco Pistons
Includes 4 rods, 4 pistons, wrist pins, rings, and clips
Fits All 1.8t's
This is a piston and rod combo pack for 1.8t 20v engines. It includes a set of IE's high quality forged 4340 H beam connecting rods, and a set of Wiseco forged pistons. Wiseco pistons are an excellent value, using high quality forging and machining. They are made from 4032 aluminum alloy which has less thermal expansion then 2618, but is not quite as strong. This allows a tighter motor to be built. They also feature beautiful machine work and fit and finish. In addition, IE's connecting rods are proven to 750+ BHP for the light weight H beam design and are carefully inspected. IE goes a notch beyond most connecting rod manufacturers in that they actually perform destructive testing on their connecting rods to ensure that every production run is up to par.



Features
IE Forged 4340 H Beam Con-Rods
Wiseco Pistons
Includes 4 rods, 4 pistons, wrist pins, rings, and clips
Fits All 1.8t's
1.8T Wiseco Pistons / IE Rods Combo- 83mm Bore, 9:1 CR 92.8MM Stroker 1.8T JE Pistons / IE Rods Combo- 81mm Bore 1.8T JE Pistons / IE Rods Combo- 81.5mm Bore
1.8T Wiseco Pistons / IE Rods Combo- 83mm Bore, 9:1 CR 92.8MM Stroker
List Price: $999.99
Our Price: $899.99
Save $100.00!
1.8T JE Pistons / IE Rods Combo- 81mm Bore
List Price: $999.99
Our Price: $914.95
Save $85.04!
1.8T JE Pistons / IE Rods Combo- 81.5mm Bore
List Price: $999.99
Our Price: $914.95
Save $85.04!
This is a piston and rod combo pack for 1.8t 20v engines. This combination provides 2008cc with a 92.8mm stroke crank. It includes a set of IE's high quality forged 4340 H beam connecting rods, and a set of 83mm diameter Wiseco forged pistons. These pistons come complete with anti-detonation grooving on the upper ring land, as well as an accumulator groove between the 1st and second rings. They also feature beautiful machine work and fit and finish. The domes are brushed to remove all sharp edges which may cause detonation. In addition, IE's connecting rods are proven to 750+ BHP for the light weight H beam design and are carefully inspected and tested. IE goes a notch beyond most connecting rod manufacturers in that they actually perform destructive testing on their connecting rods to ensure that every production run is up to par.

This is what you need to build a very strong 1.8t which will take virtually anything you can throw at it. 83mm is a 2mm oversize for 1.8t 20v engines, and requires boring, the overbore 1.8t head gasket must be used.This is typically the largest bore we recommend.

Features
IE Forged 4340 H Beam Con-Rods
83mm, 9:1 CR Wiseco Pistons
Includes 4 rods, 4 pistons, wrist pins, rings, and clips
Fits All 1.8t's
For 92.8mm Stroke Crankshafts
This is a piston and rod combo pack for 1.8t 20v engines. It includes a set of IE's high quality forged 4340 H beam connecting rods, and a set of 81mm diameter JE forged pistons. JE pistons are a notch above the pack. They utilize more expensive, and stronger 2618 alloy, compared to the more common 4032 alloy. They also feature beautiful machine work and fit and finish. These pistons are used in more winning race cars then any other brand. In addition, IE's connecting rods are proven to 750+ BHP for the light weight H beam design and are carefully inspected and tested. IE goes a notch beyond most connecting rod manufacturers in that they actually perform destructive testing on their connecting rods to ensure that every production run is up to par.

This is what you need to build a very strong 1.8t which will take virtually anything you can throw at it. 81mm is a quick drop in solution for stock bore 1.8t's.

Features
IE Forged 4340 H Beam Con-Rods
81mm, 8.5:1 or 9.25:1 CR JE Pistons
Includes 4 rods, 4 pistons, wrist pins, rings, and clips
Fits All 1.8t's
This is a piston and rod combo pack for 1.8t 20v engines. It includes a set of IE's high quality forged 4340 H beam connecting rods, and a set of 81.5mm diameter JE forged pistons. JE pistons are a notch above the pack. They utilize more expensive, and stronger 2618 alloy, compared to the more common 4032 alloy. They also feature beautiful machine work and fit and finish. These pistons are used in more winning race cars then any other brand. In addition, IE's connecting rods are proven to 750+ BHP for the light weight H beam design and are carefully inspected and tested. IE goes a notch beyond most connecting rod manufacturers in that they actually perform destructive testing on their connecting rods to ensure that every production run is up to par.

This is what you need to build a very strong 1.8t which will take virtually anything you can throw at it. 81.5mm is a .5mm oversize for 1.8t 20v engines, and requires boring, the stock headgasket can still be used.

Features
IE Forged 4340 H Beam Con-Rods
81mm, 8.5:1 or 9.25:1 CR JE Pistons
Includes 4 rods, 4 pistons, wrist pins, rings, and clips
Fits All 1.8t's

1.8T JE Pistons / IE Rods Combo- 82mm Bore 1.8T JE Pistons / IE Rods Combo- 82.5mm Bore 1.8T JE Pistons / IE Rods Combo- 83mm Bore
1.8T JE Pistons / IE Rods Combo- 82mm Bore
List Price: $999.99
Our Price: $914.95
Save $85.04!
1.8T JE Pistons / IE Rods Combo- 82.5mm Bore
List Price: $999.99
Our Price: $914.95
Save $85.04!
1.8T JE Pistons / IE Rods Combo- 83mm Bore
List Price: $999.99
Our Price: $914.95
Save $85.04!
This is a piston and rod combo pack for 1.8t 20v engines. It includes a set of IE's high quality forged 4340 H beam connecting rods, and a set of 82mm diameter JE forged pistons. JE pistons are a notch above the pack. They utilize more expensive, and stronger 2618 alloy, compared to the more common 4032 alloy. They also feature beautiful machine work and fit and finish. These pistons are used in more winning race cars then any other brand. In addition, IE's connecting rods are proven to 750+ BHP for the light weight H beam design and are carefully inspected and tested. IE goes a notch beyond most connecting rod manufacturers in that they actually perform destructive testing on their connecting rods to ensure that every production run is up to par.

This is what you need to build a very strong 1.8t which will take virtually anything you can throw at it. 82mm is a 1mm oversize for 1.8t 20v engines, and requires boring, the stock headgasket can still be used.

Features
IE Forged 4340 H Beam Con-Rods
82mm, 8.5:1 or 9.25:1 CR JE Pistons
Includes 4 rods, 4 pistons, wrist pins, rings, and clips
Fits All 1.8t's
This is a piston and rod combo pack for 1.8t 20v engines. It includes a set of IE's high quality forged 4340 H beam connecting rods, and a set of 82.5mm diameter JE forged pistons. JE pistons are a notch above the pack. They utilize more expensive, and stronger 2618 alloy, compared to the more common 4032 alloy. They also feature beautiful machine work and fit and finish. These pistons are used in more winning race cars then any other brand. In addition, IE's connecting rods are proven to 750+ BHP for the light weight H beam design and are carefully inspected and tested. IE goes a notch beyond most connecting rod manufacturers in that they actually perform destructive testing on their connecting rods to ensure that every production run is up to par.

This is what you need to build a very strong 1.8t which will take virtually anything you can throw at it. 82.5mm is 1.5mm oversize, and an overbore headgasket is required.

Features
IE Forged 4340 H Beam Con-Rods
82.5mm, 8.5:1 or 9.25:1 CR JE Pistons
Includes 4 rods, 4 pistons, wrist pins, rings, and clips
Fits All 1.8t's
This is a piston and rod combo pack for 1.8t 20v engines. It includes a set of IE's high quality forged 4340 H beam connecting rods, and a set of 83mm diameter JE forged pistons. JE pistons are a notch above the pack. They utilize more expensive, and stronger 2618 alloy, compared to the more common 4032 alloy. They also feature beautiful machine work and fit and finish. These pistons are used in more winning race cars then any other brand. In addition, IE's connecting rods are proven to 750+ BHP for the light weight H beam design and are carefully inspected and tested. IE goes a notch beyond most connecting rod manufacturers in that they actually perform destructive testing on their connecting rods to ensure that every production run is up to par.

This is what you need to build a very strong 1.8t which will take virtually anything you can throw at it. 83mm is 2mm oversize, and an overbore headgasket is required.

Features
IE Forged 4340 H Beam Con-Rods
83mm, 8.5:1 or 9.25:1 CR JE Pistons
Includes 4 rods, 4 pistons, wrist pins, rings, and clips
Fits All 1.8t's
2.0T FSI JE Pistons / IE Rods Combo- 82.5mm Bore 2.0T FSI JE Pistons / IE Rods Combo- 83mm Bore 2.0T FSI JE Pistons / IE Rods Combo- 83.5mm Bore
2.0T FSI JE Pistons / IE Rods Combo- 82.5mm Bore
List Price: $999.99
Our Price: $914.95
Save $85.04!
2.0T FSI JE Pistons / IE Rods Combo- 83mm Bore
List Price: $999.99
Our Price: $914.95
Save $85.04!
2.0T FSI JE Pistons / IE Rods Combo- 83.5mm Bore
List Price: $999.99
Our Price: $914.95
Save $85.04!
This is a piston and rod combo pack for VW 2.0T FSI engines. It includes a set of IE's high quality forged 4340 H beam connecting rods, and a set of 82.5mm diameter JE forged pistons. JE pistons are a notch above the pack. They utilize more expensive, and stronger 2618 alloy, compared to the more common 4032 alloy. They also feature beautiful machine work and fit and finish. These pistons are used in more winning race cars then any other brand. In addition, IE's connecting rods are proven to 750+ BHP for the light weight H beam design and are carefully inspected and tested. IE goes a notch beyond most connecting rod manufacturers in that they actually perform destructive testing on their connecting rods to ensure that every production run is up to par.

This is what you need to build a very strong FSI which will take virtually anything you can throw at it. 82.5mm is a STD bore that works fine with the stock headgasket or the ABA headgasket.

Features
IE Forged 4340 H Beam Con-Rods
82.5mm Bore, 92.8mm Stroke
8.5:1, 9.5:1, 10.5:1 CR JE Pistons
Includes 4 rods, 4 pistons, wrist pins, rings, and clips
Fits all 2.0 FSI

TOOL STEEL WRIST PINS RECOMMENDED FOR OVER 400WHP!

Piston coatings have a 2-3 week lead time
This is a piston and rod combo pack for VW 2.0T FSI engines. It includes a set of IE's high quality forged 4340 H beam connecting rods, and a set of 83mm diameter JE forged pistons. JE pistons are a notch above the pack. They utilize more expensive, and stronger 2618 alloy, compared to the more common 4032 alloy. They also feature beautiful machine work and fit and finish. These pistons are used in more winning race cars then any other brand. In addition, IE's connecting rods are proven to 750+ BHP for the light weight H beam design and are carefully inspected and tested. IE goes a notch beyond most connecting rod manufacturers in that they actually perform destructive testing on their connecting rods to ensure that every production run is up to par.

This is what you need to build a very strong FSI which will take virtually anything you can throw at it. 83mm is a 0.5mm overbore that works fine with the stock headgasket or the ABA headgasket.

Features
IE Forged 4340 H Beam Con-Rods
83mm Bore, 92.8mm Stroke
8.5:1, 9.5:1, 10.5:1 CR JE Pistons
Includes 4 rods, 4 pistons, wrist pins, rings, and clips
Fits all 2.0 FSI


TOOL STEEL WRIST PINS RECOMMENDED FOR OVER 400WHP!

Piston coatings have a 2-3 week lead time
This is a piston and rod combo pack for VW 2.0T FSI engines. It includes a set of IE's high quality forged 4340 H beam connecting rods, and a set of 83.5mm diameter JE forged pistons. JE pistons are a notch above the pack. They utilize more expensive, and stronger 2618 alloy, compared to the more common 4032 alloy. They also feature beautiful machine work and fit and finish. These pistons are used in more winning race cars then any other brand. In addition, IE's connecting rods are proven to 750+ BHP for the light weight H beam design and are carefully inspected and tested. IE goes a notch beyond most connecting rod manufacturers in that they actually perform destructive testing on their connecting rods to ensure that every production run is up to par.

This is what you need to build a very strong FSI which will take virtually anything you can throw at it. 83.5mm is a 1mm overbore that works fine with the stock headgasket or the ABA headgasket.

Features
IE Forged 4340 H Beam Con-Rods
83.5mm Bore, 92.8mm Stroke
8.5:1, 9.5:1, 10.5:1 CR JE Pistons
Includes 4 rods, 4 pistons, wrist pins, rings, and clips
Fits all 2.0 FSI


TOOL STEEL WRIST PINS RECOMMENDED FOR OVER 400WHP!

Piston coatings have a 2-3 week lead time
1.8T JE Pistons / IE Rods Combo- 83mm Bore, 92.8MM Stroker 1.8T JE Pistons / IE Rods Combo- 83mm Bore, 95.5MM Stroker Mahle PowerPack 81.5MM Bore 8.5:1 CR 1.8T Piston Rod Combo
1.8T JE Pistons / IE Rods Combo- 83mm Bore, 92.8MM Stroker
List Price: $999.99
Our Price: $979.99
Save $20.00!
1.8T JE Pistons / IE Rods Combo- 83mm Bore, 95.5MM Stroker
List Price: $999.99
Our Price: $979.99
Save $20.00!
This is a piston and rod combo pack for 1.8t 20v engines. This combination provides 2032cc with a 92.8mm stroke crank. It includes a set of IE's high quality forged 4340 H beam connecting rods, and a set of 83mm diameter JE forged pistons. JE pistons are a notch above the pack. They utilize more expensive, and stronger 2618 alloy, compared to the more common 4032 alloy. They also feature beautiful machine work and fit and finish. These pistons are used in more winning race cars then any other brand. In addition, IE's connecting rods are proven to 750+ BHP for the light weight H beam design and are carefully inspected and tested. IE goes a notch beyond most connecting rod manufacturers in that they actually perform destructive testing on their connecting rods to ensure that every production run is up to par.

This is what you need to build a very strong 1.8t which will take virtually anything you can throw at it. 83mm is a 2mm oversize for 1.8t 20v engines, and requires boring, the overbore 1.8t head gasket must be used.This is typically the largest bore we recommend.



Features
IE Forged 4340 H Beam Con-Rods
83mm, 8.5:1 or 9.5:1 CR JE Pistons
Includes 4 rods, 4 pistons, wrist pins, rings, and clips
Fits All 1.8t's
For 92.8mm Stroke Crankshafts
These may take up to 2-3 weeks for delivery. Please inquire!
This is a piston and rod combo pack for 1.8t 20v engines. This combination provides 2067cc with a 95.5mm stroke (MK4 TDI) crank. It includes a set of IE's high quality forged 4340 H beam connecting rods, and a set of 83mm diameter JE forged pistons. JE pistons are a notch above the pack. They utilize more expensive, and stronger 2618 alloy, compared to the more common 4032 alloy. They also feature beautiful machine work and fit and finish. These pistons are used in more winning race cars then any other brand. In addition, IE's connecting rods are proven to 750+ BHP for the light weight H beam design and are carefully inspected and tested. IE goes a notch beyond most connecting rod manufacturers in that they actually perform destructive testing on their connecting rods to ensure that every production run is up to par.

This is what you need to build a very strong 1.8t which will take virtually anything you can throw at it. 83mm is a 2mm oversize for 1.8t 20v engines, and requires boring, the overbore 1.8t head gasket must be used.This is typically the largest bore we recommend.



Features
IE Forged 4340 H Beam Con-Rods
83mm, 8.5:1 or 9.5:1 CR JE Pistons
Includes 4 rods, 4 pistons, wrist pins, rings, and clips
Fits All 1.8t's
For 95.5mm Stroke Crankshafts
These are usually in stock but may take up to 2-3 weeks for delivery. Please inquire!
This is a piston rod combo comprised of extremely high quality Mahle PowerPack pistons for the 1.8t 20v engine, and IE connecting rods. Mahle Powerpack pistons are extremely high quality pieces which provide improvements in strength over OEM pistons without some of the sacrifices sometimes found in other forged pistons. Mahle Powerpack pistons are precision forged from 4032 alloy, a low expansion rate aluminum. They all feature forged side reliefs, reducing the weight of the overall package. They also use slipper skirt designs, reducing friction and further reducing weight. Mahle PowerPack pistons feature ultra flat ring grooves, which promote excellent ring seal and most importantly reduce the chances of micro-welding during break in. Every set of Mahle PowerPack pistons comes with their exclusive Grafal skirt coating, which is not only anti-friction but also offers impact absorbing qualities, reducing piston noise and decreasing stresses in the piston skirt. Mahle PowerPack Pistons are an excellent choice for those looking for increases in strength while maintaining a lightweight piston with oem fit and finish. In addition, IE's connecting rods are proven to 750+ BHP for the light weight H beam design and are carefully inspected and tested. IE goes a notch beyond most connecting rod manufacturers in that they actually perform destructive testing on their connecting rods to ensure that every production run is up to par.

Features:
81.5mm Bore, 86.4mm stroke.
8.5:1 Compression ratio
COMPLETE WITH RINGS, PINS, WIRE LOCKS, AND ARP 2000 ROD BOLTS
Mahle PowerPack 81MM Bore 8.5:1 CR 1.8T Piston Rod Combo Mahle PowerPack 83MM Bore 9:1 CR 1.8T Piston Rod Combo 92.8MM STROKER JE 83MM Bore 2.5L 5CYL MK5 Piston Rod Combo
JE 83MM Bore 2.5L 5CYL MK5 Piston Rod Combo
List Price: $1,450.00
Our Price: $1,289.99
Save $160.01!
This is a piston rod combo comprised of extremely high quality Mahle PowerPack pistons for the 1.8t 20v engine, and IE connecting rods. Mahle Powerpack pistons are extremely high quality pieces which provide improvements in strength over OEM pistons without some of the sacrifices sometimes found in other forged pistons. Mahle Powerpack pistons are precision forged from 4032 alloy, a low expansion rate aluminum. They all feature forged side reliefs, reducing the weight of the overall package. They also use slipper skirt designs, reducing friction and further reducing weight. Mahle PowerPack pistons feature ultra flat ring grooves, which promote excellent ring seal and most importantly reduce the chances of micro-welding during break in. Every set of Mahle PowerPack pistons comes with their exclusive Grafal skirt coating, which is not only anti-friction but also offers impact absorbing qualities, reducing piston noise and decreasing stresses in the piston skirt. Mahle PowerPack Pistons are an excellent choice for those looking for increases in strength while maintaining a lightweight piston with oem fit and finish. In addition, IE's connecting rods are proven to 750+ BHP for the light weight H beam design and are carefully inspected and tested. IE goes a notch beyond most connecting rod manufacturers in that they actually perform destructive testing on their connecting rods to ensure that every production run is up to par.

Features:

81mm Bore, 86.4mm stroke.
8.5:1 Compression ratio
COMPLETE WITH RINGS, PINS, WIRE LOCKS, AND ARP 2000 ROD BOLTS.
This is a piston rod combo comprised of extremely high quality Mahle PowerPack pistons for the 1.8t 20v engine, and IE connecting rods. Mahle Powerpack pistons are extremely high quality pieces which provide improvements in strength over OEM pistons without some of the sacrifices sometimes found in other forged pistons. Mahle Powerpack pistons are precision forged from 4032 alloy, a low expansion rate aluminum. They all feature forged side reliefs, reducing the weight of the overall package. They also use slipper skirt designs, reducing friction and further reducing weight. Mahle PowerPack pistons feature ultra flat ring grooves, which promote excellent ring seal and most importantly reduce the chances of micro-welding during break in. Every set of Mahle PowerPack pistons comes with their exclusive Grafal skirt coating, which is not only anti-friction but also offers impact absorbing qualities, reducing piston noise and decreasing stresses in the piston skirt. Mahle PowerPack Pistons are an excellent choice for those looking for increases in strength while maintaining a lightweight piston with oem fit and finish. In addition, IE's connecting rods are proven to 750+ BHP for the light weight H beam design and are carefully inspected and tested. IE goes a notch beyond most connecting rod manufacturers in that they actually perform destructive testing on their connecting rods to ensure that every production run is up to par.

Features:
83mm Bore, 92.8mm stroke.
9:1 Compression ratio

COMPLETE WITH RINGS, PINS, WIRE LOCKS, AND ARP 2000 ROD BOLTS.

These will not fit in the TT 225 blocks, due to clearance issues. The oil squirters are in different locations in those blocks.
This is a piston and rod combo pack for VW MK5 2.5L Engines. It includes a set of IE's high quality forged 4340 H beam connecting rods, and a set of 83mm diameter JE forged pistons. JE pistons are a notch above the pack. They utilize more expensive, and stronger 2618 alloy, compared to the more common 4032 alloy. They also feature beautiful machine work and fit and finish. These pistons are used in more winning race cars then any other brand. In addition, IE's connecting rods are proven to 750+ BHP for the light weight H beam design and are carefully inspected and tested. IE goes a notch beyond most connecting rod manufacturers in that they actually perform destructive testing on their connecting rods to ensure that every production run is up to par.

This is what you need to build a very strong 2.5L which will take virtually anything you can throw at it. 83mm is a .5mm overbore that works fine with the stock headgasket.

Features
IE Forged 4340 H Beam Con-Rods
83mm, 8.5:1, 11.0:1 CR JE Pistons
Includes 5 rods, 5 pistons, wrist pins, rings, and clips
Fits MK5 2.5L Engines
12V VR6 Wiseco / IE Rods Combo - 82.5MM Bore 12V VR6 Wiseco / IE Rods Combo - 82MM Bore 12V VR6 Wiseco / IE Rods Combo - 83MM Bore
12V VR6 Wiseco / IE Rods Combo - 82.5MM Bore
List Price: $1,798.32
Our Price: $1,554.98
Save $243.34!
12V VR6 Wiseco / IE Rods Combo - 82MM Bore
List Price: $1,798.32
Our Price: $1,554.98
Save $243.34!
12V VR6 Wiseco / IE Rods Combo - 83MM Bore
List Price: $1,798.32
Our Price: $1,554.98
Save $243.34!
This is a piston and rod combo pack for VR6 12V engines. It includes a set of IE's high quality forged 4340 H beam connecting rods, and a set of Wiseco forged pistons. Wiseco pistons are an excellent value, using high quality forging and machining. They are made from 4032 aluminum alloy which has less thermal expansion then 2618, but is not quite as strong. This allows a tighter motor to be built. They also feature beautiful machine work and fit and finish. In addition, IE's connecting rods are proven to 750+ BHP for the light weight H beam design and are carefully inspected and tested. IE goes a notch beyond most connecting rod manufacturers in that they actually perform destructive testing on their connecting rods to ensure that every production run is up to par.



Features
IE Forged 4340 H Beam Con-Rods
Wiseco Pistons
Compression Ratio: 9.0:1 or 10.5;1
Includes a full set of rods, pistons, rings, and pins.
Fits All 12V VR6
This is a piston and rod combo pack for VR6 12V engines. It includes a set of IE's high quality forged 4340 H beam connecting rods, and a set of Wiseco forged pistons. Wiseco pistons are an excellent value, using high quality forging and machining. They are made from 4032 aluminum alloy which has less thermal expansion then 2618, but is not quite as strong. This allows a tighter motor to be built. They also feature beautiful machine work and fit and finish. In addition, IE's connecting rods are proven to 750+ BHP for the light weight H beam design and are carefully inspected and tested. IE goes a notch beyond most connecting rod manufacturers in that they actually perform destructive testing on their connecting rods to ensure that every production run is up to par.

Features
IE Forged 4340 H Beam Con-Rods
Wiseco Pistons
Compression Ratio: 9.0:1 or 10.5;1
Includes a full set of rods, pistons, rings, and pins.
Fits All 12V VR6
This is a piston and rod combo pack for VR6 12V engines. It includes a set of IE's high quality forged 4340 H beam connecting rods, and a set of Wiseco forged pistons. Wiseco pistons are an excellent value, using high quality forging and machining. They are made from 4032 aluminum alloy which has less thermal expansion then 2618, but is not quite as strong. This allows a tighter motor to be built. They also feature beautiful machine work and fit and finish. In addition, IE's connecting rods are proven to 750+ BHP for the light weight H beam design and are carefully inspected and tested. IE goes a notch beyond most connecting rod manufacturers in that they actually perform destructive testing on their connecting rods to ensure that every production run is up to par.



Features
IE Forged 4340 H Beam Con-Rods
Wiseco Pistons
Compression Ratio: 9.0:1 or 10.5;1
Includes a full set of rods, pistons, rings, and pins.
Fits All 12V VR6
VR6 R32 JE Pistons / IE Rods Combo- 84.5mm Bore, 11.5:1 CR VR6 R32 JE Pistons / IE Rods Combo- 84.5mm Bore, 8.5:1 CR VR6 R32 JE Pistons / IE Rods Combo- 84mm Bore, 11.5:1 CR
This is a piston and rod combo pack for VW VR6 R32 engines. It includes a set of our high quality forged 4340 H beam connecting rods, and a set of 84.5mm diameter JE forged pistons. JE pistons are a notch above the pack. They utilize more expensive, and stronger 2618 alloy, compared to the more common 4032 alloy. They also feature beatiful machinework and fit and finish. These pistons are used in more winning race cars then any other brand. In addition, our connecting rods are proven to 750+ BHP for our light weight H beam design and are carefully inspected and tested right here in Salt Lake City. We go a notch beyond most connecting rod manufacturers in that we actually perform destructive testing on our connecting rods to ensure that every production run is up to par.

This is what you need to build a very strong VR6 R32 which will take virtually anything you can throw at it. 84.5mm is a 0.5mm overbore that works fine with the stock headgasket.

Features
IE Forged 4340 H Beam Con-Rods
84.5mm Bore, 95.9mm Stroke, 11.5:1 CR JE Pistons
Includes 6 rods, 6 pistons, wrist pins, rings, and clips.
This is a piston and rod combo pack for VW VR6 R32 engines. It includes a set of our high quality forged 4340 H beam connecting rods, and a set of 84.5mm diameter JE forged pistons. JE pistons are a notch above the pack. They utilize more expensive, and stronger 2618 alloy, compared to the more common 4032 alloy. They also feature beatiful machinework and fit and finish. These pistons are used in more winning race cars then any other brand. In addition, our connecting rods are proven to 750+ BHP for our light weight H beam design and are carefully inspected and tested right here in Salt Lake City. We go a notch beyond most connecting rod manufacturers in that we actually perform destructive testing on our connecting rods to ensure that every production run is up to par.

This is what you need to build a very strong VR6 R32 which will take virtually anything you can throw at it. 84.5mm is a 0.5mm overbore that works fine with the stock headgasket.

Features
IE Forged 4340 H Beam Con-Rods
84.5mm Bore, 95.9mm Stroke, 8.5:1 CR JE Pistons
Includes 6 rods, 6 pistons, wrist pins, rings, and clips.
This is a piston and rod combo pack for VW VR6 R32 engines. It includes a set of our high quality forged 4340 H beam connecting rods, and a set of 84mm diameter JE forged pistons. JE pistons are a notch above the pack. They utilize more expensive, and stronger 2618 alloy, compared to the more common 4032 alloy. They also feature beatiful machinework and fit and finish. These pistons are used in more winning race cars then any other brand. In addition, our connecting rods are proven to 750+ BHP for our light weight H beam design and are carefully inspected and tested right here in Salt Lake City. We go a notch beyond most connecting rod manufacturers in that we actually perform destructive testing on our connecting rods to ensure that every production run is up to par.

This is what you need to build a very strong VR6 R32 which will take virtually anything you can throw at it. 84mm is a STD bore that works fine with the stock headgasket.

Features
IE Forged 4340 H Beam Con-Rods
84mm Bore, 95.9mm Stroke, 11.5:1 CR JE Pistons
Includes 6 rods, 6 pistons, wrist pins, rings, and clips.
VR6 R32 JE Pistons / IE Rods Combo- 84mm Bore, 8.5:1 CR VR6 R32 JE Pistons / IE Rods Combo- 85mm Bore, 11.5:1 CR VR6 R32 JE Pistons / IE Rods Combo- 85mm Bore, 8.5:1 CR
This is a piston and rod combo pack for VW VR6 R32 engines. It includes a set of our high quality forged 4340 H beam connecting rods, and a set of 84mm diameter JE forged pistons. JE pistons are a notch above the pack. They utilize more expensive, and stronger 2618 alloy, compared to the more common 4032 alloy. They also feature beatiful machinework and fit and finish. These pistons are used in more winning race cars then any other brand. In addition, our connecting rods are proven to 750+ BHP for our light weight H beam design and are carefully inspected and tested right here in Salt Lake City. We go a notch beyond most connecting rod manufacturers in that we actually perform destructive testing on our connecting rods to ensure that every production run is up to par.

This is what you need to build a very strong VR6 R32 which will take virtually anything you can throw at it. 84mm is a STD bore that works fine with the stock headgasket.

Features
IE Forged 4340 H Beam Con-Rods
84mm Bore, 95.9mm Stroke, 8.5:1 CR JE Pistons
Includes 6 rods, 6 pistons, wrist pins, rings, and clips.
This is a piston and rod combo pack for VW VR6 R32 engines. It includes a set of our high quality forged 4340 H beam connecting rods, and a set of 85mm diameter JE forged pistons. JE pistons are a notch above the pack. They utilize more expensive, and stronger 2618 alloy, compared to the more common 4032 alloy. They also feature beatiful machinework and fit and finish. These pistons are used in more winning race cars then any other brand. In addition, our connecting rods are proven to 750+ BHP for our light weight H beam design and are carefully inspected and tested right here in Salt Lake City. We go a notch beyond most connecting rod manufacturers in that we actually perform destructive testing on our connecting rods to ensure that every production run is up to par.

This is what you need to build a very strong VR6 R32 which will take virtually anything you can throw at it. 85mm is a 1.0mm overbore that works fine with the stock headgasket.

Features
IE Forged 4340 H Beam Con-Rods
85mm Bore, 95.9mm Stroke, 11.5:1 CR JE Pistons
Includes 6 rods, 6 pistons, wrist pins, rings, and clips.
This is a piston and rod combo pack for VW VR6 R32 engines. It includes a set of our high quality forged 4340 H beam connecting rods, and a set of 85mm diameter JE forged pistons. JE pistons are a notch above the pack. They utilize more expensive, and stronger 2618 alloy, compared to the more common 4032 alloy. They also feature beatiful machinework and fit and finish. These pistons are used in more winning race cars then any other brand. In addition, our connecting rods are proven to 750+ BHP for our light weight H beam design and are carefully inspected and tested right here in Salt Lake City. We go a notch beyond most connecting rod manufacturers in that we actually perform destructive testing on our connecting rods to ensure that every production run is up to par.

This is what you need to build a very strong VR6 R32 which will take virtually anything you can throw at it. 85mm is a 1.0mm overbore that works fine with the stock headgasket.

Features
IE Forged 4340 H Beam Con-Rods
85mm Bore, 95.9mm Stroke, 8.5:1 CR JE Pistons
Includes 6 rods, 6 pistons, wrist pins, rings, and clips.
24v VR6 JE Pistons / IE Rods Combo- 81.5mm Bore, 11.2:1 CR 24v VR6 JE Pistons / IE Rods Combo- 81.5mm Bore, 8.5:1 CR 24v VR6 JE Pistons / IE Rods Combo- 81mm Bore, 11.1:1 CR
This is a piston and rod combo pack for VW 24v VR6 engines. It includes a set of our high quality forged 4340 H beam connecting rods, and a set of 81.5mm diameter JE forged pistons. JE pistons are a notch above the pack. They utilize more expensive, and stronger 2618 alloy, compared to the more common 4032 alloy. They also feature beatiful machinework and fit and finish. These pistons are used in more winning race cars then any other brand. In addition, our connecting rods are proven to 750+ BHP for our light weight H beam design and are carefully inspected and tested right here in Salt Lake City. We go a notch beyond most connecting rod manufacturers in that we actually perform destructive testing on our connecting rods to ensure that every production run is up to par.

This is what you need to build a very strong VR6 which will take virtually anything you can throw at it. 81.5mm is a 0.5mm overbore that works fine with the stock headgasket or the ABA headgasket.

Features
IE Forged 4340 H Beam Con-Rods
81.5mm Bore, 90.3mm Stroke, 11.2:1 CR JE Pistons
Includes 6 rods, 6 pistons, wrist pins, rings, and clips.
This is a piston and rod combo pack for VW 24v VR6 engines. It includes a set of our high quality forged 4340 H beam connecting rods, and a set of 81.5mm diameter JE forged pistons. JE pistons are a notch above the pack. They utilize more expensive, and stronger 2618 alloy, compared to the more common 4032 alloy. They also feature beatiful machinework and fit and finish. These pistons are used in more winning race cars then any other brand. In addition, our connecting rods are proven to 750+ BHP for our light weight H beam design and are carefully inspected and tested right here in Salt Lake City. We go a notch beyond most connecting rod manufacturers in that we actually perform destructive testing on our connecting rods to ensure that every production run is up to par.

This is what you need to build a very strong VR6 which will take virtually anything you can throw at it. 81.5mm is a 0.5mm overbore that works fine with the stock headgasket or the ABA headgasket.

Features
IE Forged 4340 H Beam Con-Rods
81.5mm Bore, 90.3mm Stroke, 8.5:1 CR JE Pistons
Includes 6 rods, 6 pistons, wrist pins, rings, and clips.
This is a piston and rod combo pack for VW 24v VR6 engines. It includes a set of our high quality forged 4340 H beam connecting rods, and a set of 81mm diameter JE forged pistons. JE pistons are a notch above the pack. They utilize more expensive, and stronger 2618 alloy, compared to the more common 4032 alloy. They also feature beatiful machinework and fit and finish. These pistons are used in more winning race cars then any other brand. In addition, our connecting rods are proven to 750+ BHP for our light weight H beam design and are carefully inspected and tested right here in Salt Lake City. We go a notch beyond most connecting rod manufacturers in that we actually perform destructive testing on our connecting rods to ensure that every production run is up to par.

This is what you need to build a very strong VR6 which will take virtually anything you can throw at it. 81mm is a STD bore that works fine with the stock headgasket or the ABA headgasket.

Features
IE Forged 4340 H Beam Con-Rods
81mm Bore, 90.3mm Stroke, 11.1:1 CR JE Pistons
Includes 6 rods, 6 pistons, wrist pins, rings, and clips.